A320/1 Pack in heat exchanger cooling mode
Thread Starter
Join Date: Jun 2005
Location: England
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
A320/1 Pack in heat exchanger cooling mode
Can anyone please tell me how you can confirm from the ECAM sys display if the pack is operating in this exchanger cooling mode.
Cheers
Cheers
Join Date: Jul 2007
Location: UK
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
On the Bleed Page the two temperature indications downstream of the pack valve (ACM Compressor outlet temp and Water extractor outlet temp) will look significantly different from the other pack as the the ACM is u/s.
Comp outlet temp cooler and turbine temp/water extractor hotter.
Comp outlet temp cooler and turbine temp/water extractor hotter.