Brake to Vacate - how does it work?
Thread Starter
Join Date: Aug 2002
Location: Switzerland, Singapore
Posts: 1,309
Received 0 Likes
on
0 Posts
Brake to Vacate - how does it work?
Is it part of the Autobrake system or the FMGEC? What do you have to select that it starts? On what page of the CDU do you give inputs?
Is it correct that LH and AF A380 have it only? Any A346?
How does it work? Does it brake immediatly after touch down or when approaching the taxiway to vacate? When start the reversers and in what position? Do you have to select revers and what position?
Are brake temperatures generally lower than with Auto/Manual brakes? Does it hit the vacating point always?
Unfortunately there are no publications around yet, and an Airbus pdf file linked to Wikipedia seems to be lost. Smartcockpit is not updated for A380 yet.
Thanks,
Dani
Is it correct that LH and AF A380 have it only? Any A346?
How does it work? Does it brake immediatly after touch down or when approaching the taxiway to vacate? When start the reversers and in what position? Do you have to select revers and what position?
Are brake temperatures generally lower than with Auto/Manual brakes? Does it hit the vacating point always?
Unfortunately there are no publications around yet, and an Airbus pdf file linked to Wikipedia seems to be lost. Smartcockpit is not updated for A380 yet.
Thanks,
Dani
Thread Starter
Join Date: Aug 2002
Location: Switzerland, Singapore
Posts: 1,309
Received 0 Likes
on
0 Posts
thanks, Lakerman, I googled everything - and I'm quite good at it -, but couldn't find the answers to the questions above. Wikipedia is not very detailed, Airbus only on the commercial level. The video is from a non-Airbus aircraft landing without any information.
I'm interested in information on about FCOM detail level.
Thanks to everyone,
Dani
I'm interested in information on about FCOM detail level.
Thanks to everyone,
Dani
Join Date: Mar 2010
Location: on a blue balloon
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts