Life expectancy of GA seat belts.
Thread Starter
Life expectancy of GA seat belts.
I recently worked in an helicopter which was built in 1980 and was surprised that the seat belts and buckle appeared to be original. Although not frayed they looked weathered and were very stiff.
How are seat belts determined to be airworthy? Are they replaced on inspection or are they time limited.
I ask as I understand that car seat belts lose their elasticity with age and/or use and I assume the same thing happens with aircraft seat belts?
How are seat belts determined to be airworthy? Are they replaced on inspection or are they time limited.
I ask as I understand that car seat belts lose their elasticity with age and/or use and I assume the same thing happens with aircraft seat belts?
Join Date: Mar 2011
Location: Milano
Age: 53
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
On the gliders I flew the webbing was always time limited to 12 years with the expiration date clearly stamped on each piece of webbing. Metal parts were "on condition" and were to be replaced only if deemed unairworthy upon inspection.
I'm not 100% sure but I do think the 12-year limit was a manufacturer-imposed limit, I don't think there's an actual blanket limit in any regs, that is to say if the manufacturer does not time-limit any belt component part it is then to be understood to be "on condition" only.
I'm not 100% sure but I do think the 12-year limit was a manufacturer-imposed limit, I don't think there's an actual blanket limit in any regs, that is to say if the manufacturer does not time-limit any belt component part it is then to be understood to be "on condition" only.
Thread Starter
does not time-limit any belt component part it is then to be understood to be "on condition" only.
Ill check for a stamp or tag. I'm concerned that (over 30 years!) they would have lost their elasticity which is an important part of absorbing shock load to the hard point as well as reducing blunt trauma to the passenger.
In this case I don't have faith in "on condition" as it is beyond the means of most to evaluate the elasticity. In general I'm surprised that they have passed master as they look knackered.
As it is a simple lap belt I'll buy my own to solve the problem!
Join Date: Aug 2006
Location: cardiff
Posts: 598
Likes: 0
Received 0 Likes
on
0 Posts
Excuse me for jumping in here... in UK you'll need to read
CAAIP (CAP562) leaflet 25-40 Appendix 1; life of the belt is set by the fatigue life of components within the buckle (such as any springs etc)
and is generally set at 10 yrs by the belt manufacturers.
Hope this helps
CAAIP (CAP562) leaflet 25-40 Appendix 1; life of the belt is set by the fatigue life of components within the buckle (such as any springs etc)
and is generally set at 10 yrs by the belt manufacturers.
Hope this helps
Join Date: Jul 2007
Location: Auckland, NZ
Age: 79
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
My understanding is that with car belts, exposure to UV is part of the problem. This is more likely to matter with plastic materials than with stuff that was grown, I'd guess.
Thread Starter
This is more likely to matter with plastic materials than with stuff that was grown, I'd guess.
The belt is 1908s webbing which I guess is plastic/nylon?
Mickjoebill
Join Date: Jan 2005
Location: France
Posts: 2,315
Likes: 0
Received 0 Likes
on
0 Posts
LOL re the typo....
If the helo and the belt date from 1908, both should be donated to a museum ASAP.....
Better safe than sorry.... I couldn't agree more.
Makes one wonder about seat-belts in older cars... (I agree, more a subject for JetBlast) I regularly do a pre-flight (err... 'pre-drive') check on the functioning of the inertia reel lock, but of course that tells me nothing about the aging of the belts themselves.
CJ
If the helo and the belt date from 1908, both should be donated to a museum ASAP.....
As it is a simple lap belt I'll buy my own to solve the problem!
Makes one wonder about seat-belts in older cars... (I agree, more a subject for JetBlast) I regularly do a pre-flight (err... 'pre-drive') check on the functioning of the inertia reel lock, but of course that tells me nothing about the aging of the belts themselves.
CJ
Thread Starter
Ok, the manufacturer says the life of this particular belt is 10 years, so according to the tag, this one is 4 years out of date.
Is it illegal?
In respect to my earlier question about wire insert was answered by the manufacturer.
The latch part (the short end that does not pass over the lap) has wire inserts to make it stiff so that it is easy to find. The wire is designed to break under load so doesn't compromise shock loading.
Mickjoebill
Is it illegal?
In respect to my earlier question about wire insert was answered by the manufacturer.
The latch part (the short end that does not pass over the lap) has wire inserts to make it stiff so that it is easy to find. The wire is designed to break under load so doesn't compromise shock loading.
Mickjoebill
Join Date: Mar 2011
Location: Milano
Age: 53
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
Ok, the manufacturer says the life of this particular belt is 10 years, so according to the tag, this one is 4 years out of date.
Is it illegal?
Is it illegal?
Dg800
