Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

autopilot b 737 cl

Wikiposts
Search

Notices
Tech Log The very best in practical technical discussion on the web

autopilot b 737 cl

Thread Tools
 
Search this Thread
 
Old 18th May 2011 | 10:39
  #1 (permalink)  
Thread Starter
 
Joined: Nov 2007
Posts: 83
Likes: 0
From: Sweden
autopilot b 737 cl

Hello, just one doubt:
I have read on the manual that for engage the autopilot on b737 cl there are 2 criteria to satisfy:
- no force applied to control wheel
-stab trim autopilot cutout switch is normal
My doubt is: if the attitude of the aircraft is completely in disagree with the fd for pitch and track, is possible to engage the autopilot or before it must be in agreement with the fd?
uchy is offline  
Reply
Old 18th May 2011 | 11:10
  #2 (permalink)  
25 Anniversary
 
Joined: Jun 2000
Aviation Qualifications: ATP+Mil
Posts: 4,698
Likes: 1,305
From: Australia
You don't need to have the flight director switched on to operate the automatic pilot.
Centaurus is offline  
Reply
Old 19th May 2011 | 22:35
  #3 (permalink)  
 
Joined: Feb 2007
Posts: 47
Likes: 0
From: Thirty West
If you are not following the FD and try to engage the AP it will revert to CWS in the axis not followed.
cirr737 is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.