a320 flap lever fault question
Joined: Sep 2000
Posts: 562
Likes: 0
No ECAM warning for flap lever fault. The Slats/flaps remain in their commanded position (the aircraft is unaware you have requested them to move) therefore no ECAM. You may get an overspeed warning on departure, without the commanded speed bug being in the overspeed red area.

Joined: Apr 2004
Posts: 775
Likes: 2
From: near EDDF
If you have a complete CSU (Command Sensor Unit) failure your warning would be:
F/CTL FLAPS LOCKED
F/CTL SLATS LOCKED
If it is partially U/S the warning depends on what part is defect. Possible is:
F/CTL FLAP SYS 1 FAULT or
F/CTL FLAP SYS 2 FAULT or
F/CTL SLAT SYS 1 FAULT or
F/CTL SLAT SYS 2 FAULT
F/CTL FLAPS LOCKED
F/CTL SLATS LOCKED
If it is partially U/S the warning depends on what part is defect. Possible is:
F/CTL FLAP SYS 1 FAULT or
F/CTL FLAP SYS 2 FAULT or
F/CTL SLAT SYS 1 FAULT or
F/CTL SLAT SYS 2 FAULT




