Limits ILS CAT II
Thread Starter
Joined: Apr 2010
Posts: 37
Likes: 0
From: EUROPE
Limits ILS CAT II
Hi.
As everybody knows the limits for ILS CAT II are: DH 200 ft or lower but not less than 100 ft.
But, Why is published (sometimes) RA 95 ft? I donīt understand it, that means less than 100 ft.
Does anyone know the explanation for that?
Regards.
As everybody knows the limits for ILS CAT II are: DH 200 ft or lower but not less than 100 ft.
But, Why is published (sometimes) RA 95 ft? I donīt understand it, that means less than 100 ft.
Does anyone know the explanation for that?
Regards.
Joined: Oct 2007
Posts: 489
Likes: 0
From: Scotland
The point at which you "decide" will be 100ft above the threshold, but it may not be 100ft above the local terrain, so the RAD ALT readout of 95ft means the "local terrain" at the point which is = to 100ft above threshold is 5ft higher.
CC
CC
Per Ardua ad Astraeus
Joined: Mar 2000
Posts: 18,575
Likes: 4
From: UK
As stated, DH is always 'above threshold', but the picture is clouded by several ops manuals which err in this respect (including my last). Commonly they quote "Decision Height - Minimum 100 ft radio" (my bold) and then go on to offer 'Radio' DH's well below 100. 90'RA' in one case, 91'RA' in another. Obviously the manual should state "Decision Height - Minimum 100 ft ATE" and then all would be well. Previous management were sadly ill-equipped to understand the error in the text. Hopefully new team are better 'equipped'
