Can AP be engaged when sidestick or pedals out of neutral position on Airbus?
Thread Starter
Join Date: Jun 2010
Location: Shanghai, China
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Can AP be engaged when sidestick or pedals out of neutral position on Airbus?
I know that overriding the sidestick or rudder pedals when AP engaged could cause AP disconnection. But if the sidestick or rudder pedals already deflects without AP engagement, the AP can be engaged by pushing the AP button on FCU? If so, how long will AP really control the A/C to mitigate the transient?
thx
thx
Join Date: Oct 2006
Location: Gone Flying...
Age: 63
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Yes. In the FBW Airbus aircraft you can engage the AP with sidestick or pedals out of the neutral position, as long as you "let the controls" come back to neutral. The AP will take-over almost immediately but will fly either to the selected course of action active on the FCU or (if FD's are off) it will revert to basic mode HDG/VS.
Thread Starter
Join Date: Jun 2010
Location: Shanghai, China
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Do you mean that AP can be engaged but not control the A/C with controls out of neutral position and the AP will be actually work after the controls back to neutral?
Yes. In the FBW Airbus aircraft you can engage the AP with sidestick or pedals out of the neutral position, as long as you "let the controls" come back to neutral.
aguadalte, thank you. Do you mean that AP can be engaged but not control the A/C with controls out of neutral position and the AP will be actually work after the controls back to neutral?
Join Date: Dec 2007
Location: Changi
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
It depends really. If the contols are out of the required envelope, the AP will engage BUT it will actually trip after a few secs. Happened a few times in a simulator, when we were out of trim on eng out approaches and go-arounds.
For us, the cue is waiting for the "click" to see if the AP has taken over control fully. The "click" is actually the locking device used to lokc the sidestick in position.
Hope this helps,
Cheers,
lion-g
It depends really. If the contols are out of the required envelope, the AP will engage BUT it will actually trip after a few secs. Happened a few times in a simulator, when we were out of trim on eng out approaches and go-arounds.
For us, the cue is waiting for the "click" to see if the AP has taken over control fully. The "click" is actually the locking device used to lokc the sidestick in position.
Hope this helps,
Cheers,
lion-g
Join Date: Jun 2010
Location: Brisbane, Australia
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
Now I'm confused..as a non AB person...
With the AB, are you not flying with the autopilot ALL the time...it's simply a matter of manual (sidestick) electronic input, or else fully automated control, with something resembling VNAV and LNAV directing progress.
cheers
With the AB, are you not flying with the autopilot ALL the time...it's simply a matter of manual (sidestick) electronic input, or else fully automated control, with something resembling VNAV and LNAV directing progress.
cheers
Moderator
Join Date: Apr 2004
Location: Rome
Posts: 792
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
You can be flying either manually or with the AP on. It is exactly like in other airplanes. And like in other airplanes, before inserting the autopilot you must have a well trimmed airplane, like in case of an engine failure during takeoff. Just as in a twin cessna you keep control of the airplane, give correct trim input and then insert the autopilot which will continue to do your job, but it is not your substitute.
Bye
You can be flying either manually or with the AP on. It is exactly like in other airplanes. And like in other airplanes, before inserting the autopilot you must have a well trimmed airplane, like in case of an engine failure during takeoff. Just as in a twin cessna you keep control of the airplane, give correct trim input and then insert the autopilot which will continue to do your job, but it is not your substitute.
Bye