Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

Real Vs Actual weights and speeds

Wikiposts
Search
Tech Log The very best in practical technical discussion on the web

Real Vs Actual weights and speeds

Thread Tools
 
Search this Thread
 
Old 20th Sep 2010, 13:30
  #1 (permalink)  
Thread Starter
 
Join Date: Mar 1999
Location: UK
Posts: 367
Likes: 0
Received 0 Likes on 0 Posts
Real Vs Actual weights and speeds

As part of the approach and landing brief on the A320 family, we always look at the perf pages and compare the various speeds. Vapp and Vls are, normally 5kts apart.
Trundling down the last bit of the approach, on a nice calm day and groundspeed mini not sticking it's 2 cents worth in, quite often on the speed tape Vapp and Vls have a much smaller split, say 2 or 3 kts.

My understanding is that the Vapp on the tape is the managed value calculated from the weight data entered into the FMC before engine start, and is therefore only as accurate as the standardised weights given to you on the load sheet, and Vls is measured from the airdata sensors, especially the AoA vanes. Some colleagues suggest adding a few knots to Vapp to make at least a 5kt split on the tape. Others that, in normal law, we have full protection and to leave the speeds as they are.

Following the thread about the Perpignan test flight crash, with frozen or stuck AoA vanes, has anyone any comments. On a normal runway it possibly makes no odds, but short or hot and high, then the energy differences start to add up.
Grateful for your thoughts.
Nubboy is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.