Bizjet oxygen refill fitting - what is it?
Thread Starter
Join Date: Jun 2003
Location: EuroGA.org
Posts: 13,787
Likes: 0
Received 0 Likes
on
0 Posts
Bizjet oxygen refill fitting - what is it?
I am looking for an adaptor which screws onto a U.S. 540 oxygen cylinder and which accepts the standard hose used to refill business jet cylinders at major airports around the world.
The hose fitting in question is a small fine thread - about 1/4" OD, I vaguely recall. It *may be* Puritan Bennett but really I haven't got a clue. Nobody I know knows what it is - even people who work on big turboprops.
The hose fitting in question is a small fine thread - about 1/4" OD, I vaguely recall. It *may be* Puritan Bennett but really I haven't got a clue. Nobody I know knows what it is - even people who work on big turboprops.
Join Date: Mar 2008
Location: London
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
I can think of several
Male or Female?
The standard one is FA-540 of course but there is a Puritan Bennett adaptor. And a Scott.
There are pictures on Aviation Oxygen Refill Stations
is it not there?
The standard one is FA-540 of course but there is a Puritan Bennett adaptor. And a Scott.
There are pictures on Aviation Oxygen Refill Stations
is it not there?
Thread Starter
Join Date: Jun 2003
Location: EuroGA.org
Posts: 13,787
Likes: 0
Received 0 Likes
on
0 Posts
The 540 thread I know well - that is what the US cylinders have. But this is big - about 20mm dia. The thread I have seen is about half that size.
Are you saying there is more than one "standard" and that when a King Air pilot lands somewhere and needs his emergency o2 topped off, somebody needs to mess around with adaptors? This may be so, in which case there is no simple solution.
That URL is dead, currently. This one might be relevant, perhaps, but I cannot see enough detail.
Are you saying there is more than one "standard" and that when a King Air pilot lands somewhere and needs his emergency o2 topped off, somebody needs to mess around with adaptors? This may be so, in which case there is no simple solution.
That URL is dead, currently. This one might be relevant, perhaps, but I cannot see enough detail.
Emergency O2
If its an adapter for refilling walkround/emergency O2 bottles, the one we use is part number MC1100, maker unknown, unfortunately. Hope that helps.
Cheers
Cheers