320 ignition
Thread Starter
Join Date: Mar 2005
Location: Uh... Where was I?
Posts: 1,338
Likes: 0
Received 0 Likes
on
0 Posts
320 ignition
Hi
As you know, sometimes it's hard to find the relevant FCOM paragraph.
In this case, I need to find where it is described when and how continuous ignition is automatically activated when ENG A.ICE is ON and for take off and approach.
I just can't find it and I am getting
please help me, before I destroy my laptop!
As you know, sometimes it's hard to find the relevant FCOM paragraph.
In this case, I need to find where it is described when and how continuous ignition is automatically activated when ENG A.ICE is ON and for take off and approach.
I just can't find it and I am getting
please help me, before I destroy my laptop!
Join Date: Feb 2006
Location: Ireland
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Depends how old
I believe it depends how old your Airbus is or perhaps the aircraft software.The ignition does indeed come on with anti ice selection,on the "older" models.The later models leave it to the Fadec to decide if it's needed.
Join Date: Oct 2009
Location: UK
Posts: 1,270
Likes: 0
Received 0 Likes
on
0 Posts
Hi MB2002,
It's hidden in another "logic flow diagram" under:
Fcom 1.70.80 - Ignition system -Automatic selection.
It's the funny little button picture.
It depends on which Registration you're looking at. Our newish 319s don't have automatic ignition with engine anti-ice.
It's hidden in another "logic flow diagram" under:
Fcom 1.70.80 - Ignition system -Automatic selection.
It's the funny little button picture.
It depends on which Registration you're looking at. Our newish 319s don't have automatic ignition with engine anti-ice.
Thread Starter
Join Date: Mar 2005
Location: Uh... Where was I?
Posts: 1,338
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys I will check with older FCOMs...
And what about take off and approach. Does ignition activate with slats, or something like that? I thought it was mandatory to have ignition during take off and approach.
But, what I am really looking for: When to select IGN ON?
And what about take off and approach. Does ignition activate with slats, or something like that? I thought it was mandatory to have ignition during take off and approach.
But, what I am really looking for: When to select IGN ON?
Join Date: Jul 2000
Location: My views - Not my employer!
Posts: 1,031
Likes: 0
Received 0 Likes
on
0 Posts
Again its some aircraft that turn the ign on for the approach (when F1 sel) Others (older) leave you to do it for yourself, if the conditions in the FCOM are satisfied. Similar for departure...