Chart for Rate of Climb VS Groundspeed VS Climb Gradient

[lion-g]

Hi Guys,

I tried searching for this chart online for the whole evening but to no avail. Can some kind souls provide me with the URL or can email me directly a softcopy ?

Thank you very much.

Cheers,
lion-g

[aterpster]

Jeppesen has such a chart in their terminal legend pages. It's called "Gradient to Rate Table."

[rudderrudderrat]

Hi,

http://www.jeppesen.com/documents/av...ext-Page-5.pdf

[lion-g]

HI guys,

Thanks for the reply. In fact I was looking for the one where there's 3 vertical scales (G/S, Climb Gradient, Rate of Climb). We will have to use a ruler to join 2 components to determine the last.

Any luck with that ?

Thanks a lot.

Cheers

[Bullethead]

A simple rule of thumb is.

Climb rate = Gradient (%) x Groundspeed.

So for example if you want to achieve a 5% gradient at 180kts G/S you need to climb at 900 fpm.

Another one, if you need to change your altitude by xxx feet/mile multiply that by your speed in miles per minute and the answer is feet per minute.

feet/mile x miles/minute = feet/minute. Up or down.

e.g. you want to lose 3000' in 10nms or 300ft/nm at 180kts (3nm/minute) descend at 900fpm.

Is this any help?

Regards,
BH.

[selfin]

ICAO Doc 8168 Volume I, figure i-3-1-3, "conversion nomogram."

PDF extract available on request.

[Pugilistic Animus]

an E6B flight computer will do it as fast as you can move your thumb

[hot_buoy]

http://www.airservices.gov.au/public...INTA01-101.pdf