Level Control Valve
Thread Starter
Join Date: Jul 2009
Location: N 06/W 75
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Level Control Valve
Hi all!
So, here's the thing. In my Twin Otter ground school we are currently studying up on fuel system. This aircraft has 2 tanks and a collector cell for each tank. The collector cell has the 2 booster pumps, a capacitance type measurement system for the fuel quantity indicator (as well as the other cells), a fuel low level float switch for the associated caution light and a level control valve.
I know the functions of all of the above items, but that level control valve is somewhat of a mystery to me, since there's not a description for that item on the manual...and since English is not my first language, things get a bit complicated at times. My initial thought about this valve is that it expels fuel to the outside if somehow the fuel tanks get over-filled. How close am I?
Thanks in advance.
So, here's the thing. In my Twin Otter ground school we are currently studying up on fuel system. This aircraft has 2 tanks and a collector cell for each tank. The collector cell has the 2 booster pumps, a capacitance type measurement system for the fuel quantity indicator (as well as the other cells), a fuel low level float switch for the associated caution light and a level control valve.
I know the functions of all of the above items, but that level control valve is somewhat of a mystery to me, since there's not a description for that item on the manual...and since English is not my first language, things get a bit complicated at times. My initial thought about this valve is that it expels fuel to the outside if somehow the fuel tanks get over-filled. How close am I?
Thanks in advance.
Join Date: Oct 2006
Location: Antigua, W.I.
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
The engines are supplied from the collector cells. Fuel is stored in a collector cell and 3 other fuel cells (a total of 4 cells for Forward tank and 4 for Aft tank).
An ejector valve in each fuel system (or "tank"), "powered" by booster pump fuel pressure, draws fuel from the other 3 fuel cells to keep the Collector cell full. When the collector cell is full, the level control valve closes, thus stopping the supply of fuel from the other 3 cells. This is the only way to stop the flow of fuel into the collector cell as the booster pumps cannot be selected off in flight. As the Collector cell empties, the Level Control Valve opens to allow the Collector cell to be replenished.
This is intended to ensure that the Collector cell will be the last one to run out of fuel.
Hope this helps.
If you need a schematic, PM me and I will try to scan and send the one I have. Please note that I came off the Twin Otter about 15 years ago and have not kept current on any system changes.
An ejector valve in each fuel system (or "tank"), "powered" by booster pump fuel pressure, draws fuel from the other 3 fuel cells to keep the Collector cell full. When the collector cell is full, the level control valve closes, thus stopping the supply of fuel from the other 3 cells. This is the only way to stop the flow of fuel into the collector cell as the booster pumps cannot be selected off in flight. As the Collector cell empties, the Level Control Valve opens to allow the Collector cell to be replenished.
This is intended to ensure that the Collector cell will be the last one to run out of fuel.
Hope this helps.
If you need a schematic, PM me and I will try to scan and send the one I have. Please note that I came off the Twin Otter about 15 years ago and have not kept current on any system changes.
Thread Starter
Join Date: Jul 2009
Location: N 06/W 75
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
When the collector cell is full, the level control valve closes, thus stopping the supply of fuel from the other 3 cells. This is the only way to stop the flow of fuel into the collector cell as the booster pumps cannot be selected off in flight. As the Collector cell empties, the Level Control Valve opens to allow the Collector cell to be replenished.
This is intended to ensure that the Collector cell will be the last one to run out of fuel.
This is intended to ensure that the Collector cell will be the last one to run out of fuel.
And yes, I'd like that schematic for further understanding of the system. Much appreciated!