Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

Bleeds and Packs

Wikiposts
Search

Notices
Tech Log The very best in practical technical discussion on the web

Bleeds and Packs

Thread Tools
 
Search this Thread
 
Old 30th September 2012 | 20:16
  #21 (permalink)  
 
Joined: Mar 2010
Posts: 64
Likes: 0
From: Nowhere for very long
Does air for the cabin come from the LP or HP compressor? Thanks
PrestonPilot is offline  
Reply
Old 30th September 2012 | 20:24
  #22 (permalink)  
15 Anniversary
 
Joined: Jan 2008
Posts: 239
Likes: 0
From: Cambridge
Depends on phase of flight. At low or idle thrust the HP bleed ps should open as LP bleed air will be insufficient.
gusting_45 is offline  
Reply
Old 30th September 2012 | 21:08
  #23 (permalink)  
 
Joined: Jan 2006
Posts: 2,205
Likes: 0
From: US
Even simpler - bleed air is too hot. Packs cool it down.


Temperature and pressure from bleed air varies depending upon engine speed.


Packs can regulate the output air to an acceptable temperature and pressure.

Last edited by misd-agin; 30th September 2012 at 21:09. Reason: added sentence
misd-agin is offline  
Reply
Old 30th September 2012 | 21:48
  #24 (permalink)  
 
Joined: Jul 2000
Posts: 1,424
Likes: 0
From: Smogsville
Don't forget the pre cooler cools the air first and the pylon bleed valve (PRSOV) regulates the pressure.
SMOC is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.