Airbus A340-500 Technical Info
Thread Starter
Join Date: Sep 2008
Location: SYD
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Airbus A340-500 Technical Info
Hey All,
I'm after some type-specific info on the Airbus A340 for an engineering assignment I'm doing for a course. Does anyone have/know where I can get the stall speeds for the A345? I'm hoping for a standard stalling speeds graph, with the stall speed, aircraft weight, configuration and pressure alitutude on it, such as the one found on smartcockpit.com for the A342/3.
I'm also looking for a cross-sectional diagram of the A345, and, in particular, the wing, so that I can examine the wing twist, etc, for this study. Any info/documents/scanned images on the above 2 points would be greatly appreciated, especially from people who have experience with this aircraft.
Also, in regards to the general design of the A340, how similar are all A340 types in regards to the actual wing shape, etc?
Thanks in advance,
MTBUR
I'm after some type-specific info on the Airbus A340 for an engineering assignment I'm doing for a course. Does anyone have/know where I can get the stall speeds for the A345? I'm hoping for a standard stalling speeds graph, with the stall speed, aircraft weight, configuration and pressure alitutude on it, such as the one found on smartcockpit.com for the A342/3.
I'm also looking for a cross-sectional diagram of the A345, and, in particular, the wing, so that I can examine the wing twist, etc, for this study. Any info/documents/scanned images on the above 2 points would be greatly appreciated, especially from people who have experience with this aircraft.
Also, in regards to the general design of the A340, how similar are all A340 types in regards to the actual wing shape, etc?
Thanks in advance,
MTBUR
Join Date: Aug 2007
Location: East England
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Would have thought that with Alpha Floor protection then there is no stall speed......it won't unless you remove all 3 FCPC's and only a fool would do that is normal use........