Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

Missing bits


Notices
Tech Log The very best in practical technical discussion on the web

Missing bits

Old 2nd February 2009 | 11:32
  #1 (permalink)  
Thread Starter
15 Anniversary
 
Joined: Nov 2006
Posts: 49
Likes: 1
From: Herts, UK
Missing bits

A friend was on a flight, and spotted this:



(DSC00984 on Flickr - Photo Sharing!)

The missing fairing worried him a bit, so he queried it with the cabin crew who said the flight deck were aware, and unworried.

Fair enough, but I was curious. I presume that the fairing would need to be signed off by an engineer. Are there some bits that it's perfectly OK to fly without?

Cheers
C152_driver is offline  
Reply
Old 2nd February 2009 | 11:43
  #2 (permalink)  
 
Joined: Jul 2000
Posts: 1,424
Likes: 0
From: Smogsville
There is an MEL - Minimum Equipment List and a CDL - Configuration Deviation List for each type of A/C, it provides specific information on what part/parts the A/C is allowed to fly without.

The flap track fairing you see missing comes under the CDL, it would have a restriction that it must be replaced within 'X' amount of days and while flying without it you must apply various performance penalties including an increase in fuel burn, in this case to the increased drag.

SMOC

Last edited by SMOC; 2nd February 2009 at 11:53.
SMOC is offline  
Reply
Old 2nd February 2009 | 12:00
  #3 (permalink)  
Thread Starter
15 Anniversary
 
Joined: Nov 2006
Posts: 49
Likes: 1
From: Herts, UK
Many thanks. I'll pass it on to him.
C152_driver is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.