CVR and FDR
Thread Starter
Joined: Jan 2009
Posts: 2
Likes: 0
From: Singapore
CVR and FDR
I'm just curious, FDR last 25hours straight so after every flts to you guys reset the thing? Or it will just restart? What about CVR? It last 30 mins and after that it will auto restart? Care to share tech crew?
Joined: Feb 2008
Posts: 1,342
Likes: 0
From: Wingham NSW Australia
CVR v's FDR
Jaded88. The FDR is unable to be 'reset' by cockpit crew and has the info downloaded by maintenance following an incident in which the info may be useful, or at appropriate intervals depending on recording duration. The CVR however is able to be erased and in some airlines it is included in the Shutdown checklist to be erased. At least that is how it used to be in my time.
Joined: Aug 2003
Posts: 190
Likes: 1
From: Earth
In my company the FDR and CVR are not reset by the flight deck. At the end of recording period the units simply start recording over the first data recorded so there is a rolling log of the preceding period. The engineers can erase the CVR units using a switch on the outside of the aircraft if required
Additionally there is a QAR which automatically uploads data to the company's Flight Safety department where it is checked against a set of predetermined limitations. This list is pretty comprehensive and covers such things as 'gates' on the approach eg fully configured by a certain point on the approach. This is used to assess trends within the fleet.
Additionally there is a QAR which automatically uploads data to the company's Flight Safety department where it is checked against a set of predetermined limitations. This list is pretty comprehensive and covers such things as 'gates' on the approach eg fully configured by a certain point on the approach. This is used to assess trends within the fleet.
Joined: Jul 2003
Posts: 445
Likes: 0
From: Canada
Jaded88
FDRs have to record for a minimum of 25hours before they start to overwrite the first recorded data. You will sometimes get longer recordings depending on the amount of data being sent to it.
Most modern CVRs are now 2 hours of audio rather than 30mins and again it just loops and overwrites the oldest data continuously.
FDRs have to record for a minimum of 25hours before they start to overwrite the first recorded data. You will sometimes get longer recordings depending on the amount of data being sent to it.
Most modern CVRs are now 2 hours of audio rather than 30mins and again it just loops and overwrites the oldest data continuously.
Joined: Apr 2004
Aviation Qualifications: LAME
Posts: 2,281
Likes: 189
From: Dorset UK
Old CVR's used a tape loop of 30 mins. So it overwrites the previous info.
However accident investigators have managed to retrieve info from more than 30 mins. by clever audio processing since the erasure is not always complete.
Newer recorders record 2 hrs as some incidents had a critical event more than 30 mins. prior to tape stopping .
However accident investigators have managed to retrieve info from more than 30 mins. by clever audio processing since the erasure is not always complete.
Newer recorders record 2 hrs as some incidents had a critical event more than 30 mins. prior to tape stopping .
Cunning Artificer
Joined: Jun 2001
Posts: 3,125
Likes: 7
From: The spiritual home of DeHavilland
CVRs and FDRs write continuously, as long as an engine is running. (Usually the oil pressure switches turn the system on and off). Starting from a clean recording medium (newer recorders are mostly solid state - SSFDR and SSCVR) they write until the storage medium is full and then continue, over-writing the older data as they go. Maintenance never erase recorded data, there is no need to do so.
For most commercial operations, flight recorder data is also stored in a Quick Access Recorder (QAR) whence it is recovered post flight on a disk or PCMCIA card and the data fed into a Flight Operations Quality Assurance (FOQA) system for analysis. Engineering also acquire flight recorder data for trouble-shooting, reliability & performance analysis or to identify defects in the flight recorder system itself.
The latest SSFDRs can record 50 hours data; SSCVRs 3 hours.
CVR data can only be erased on the ground. Circuit baulks prevent operation of the bulk erase function until the air/ground sensing is in ground mode and the parking brake is set.
Note that with SSCVRs, erased data can still be recovered by accident investigators in the same way that forensic detectives can read erased data on a computer hard disk.
For most commercial operations, flight recorder data is also stored in a Quick Access Recorder (QAR) whence it is recovered post flight on a disk or PCMCIA card and the data fed into a Flight Operations Quality Assurance (FOQA) system for analysis. Engineering also acquire flight recorder data for trouble-shooting, reliability & performance analysis or to identify defects in the flight recorder system itself.
The latest SSFDRs can record 50 hours data; SSCVRs 3 hours.
CVR data can only be erased on the ground. Circuit baulks prevent operation of the bulk erase function until the air/ground sensing is in ground mode and the parking brake is set.
Note that with SSCVRs, erased data can still be recovered by accident investigators in the same way that forensic detectives can read erased data on a computer hard disk.
Fleet Manager
Joined: Apr 2001
Aviation Qualifications: ATPL
Posts: 7,447
Likes: 310
From: various places .....
as long as an engine is running
or, more generally, when power is on the ship ? - ref CVR and FDR, noting the usual caveat that present rules may not apply specifically to a given installation on an older Type.
can record 50 hours data
and, for some, longer. The Fairchild (L3) F1000 usually gives us around 100 hours with a bit of variation, presumably due to what the actual history is and how this affects compression algorithms... we generally see 80-110 hours
or, more generally, when power is on the ship ? - ref CVR and FDR, noting the usual caveat that present rules may not apply specifically to a given installation on an older Type.
can record 50 hours data
and, for some, longer. The Fairchild (L3) F1000 usually gives us around 100 hours with a bit of variation, presumably due to what the actual history is and how this affects compression algorithms... we generally see 80-110 hours
Cunning Artificer
Joined: Jun 2001
Posts: 3,125
Likes: 7
From: The spiritual home of DeHavilland
As I understand it, the reason why the recorders aren't usually powered during time on the ground, is to preserve the recorded data. Power for the recorders still comes from the essential busses as required by the design regulations.
Data recorded all the time the aircraft is powered up would overwrite flight data with useless ground data. A typical airliner is powered up pretty much constantly between the power-off stages of major checks, but will be airborne only about 60% of the time - 14 flight hours / day would be considered a typical utilisation for a civil airliner. (The highest utilisation I can recall from my own civil operations experience is 16 hours/day.). So a permanently powered FDR would have about 40% of its useful data overwritten by irrelevant ground data. As I pointed out above, we "back room" engineers and Flight Ops QA use DFDR data for much more than accident investigation.
Data recorded all the time the aircraft is powered up would overwrite flight data with useless ground data. A typical airliner is powered up pretty much constantly between the power-off stages of major checks, but will be airborne only about 60% of the time - 14 flight hours / day would be considered a typical utilisation for a civil airliner. (The highest utilisation I can recall from my own civil operations experience is 16 hours/day.). So a permanently powered FDR would have about 40% of its useful data overwritten by irrelevant ground data. As I pointed out above, we "back room" engineers and Flight Ops QA use DFDR data for much more than accident investigation.
Thread Starter
Joined: Jan 2009
Posts: 2
Likes: 0
From: Singapore
Oh, now i get it. The newer ones (SSFDR and SSCVR) is so much useful. Being able to last so long. I'm not too surprised thou that investigaters are able to retrieve data's that have been overwrite. It's just like what Blacksheep said, similar to retrieving data's from hard disk. Anyway thanks for the replies. At least now I understand more clearly how FDR's and CVR's works. I'm only a cabin crew aspiring to be a pilot. Trying to learn as much as possible.
Joined: Oct 1999
Aviation Qualifications: ATPL
Posts: 7,376
Likes: 933
From: Den Haag
Data recorded all the time the aircraft is powered up would overwrite flight data with useless ground data.
I had a similar experience myself a year ago when, following a forced landing in a remote area in a helicopter (in jungle) I subsequently powered up the APU to use the satphone to talk to base, several times. Subsequently, when we listend to teh CVR to see exactly what the crew response to the problems in flight was, we found the 2 hour recording started 26 seconds before the first indications, had 5 minutes in the air and the rest was 1:50 of telephone chat! At the time, pulling the CVR cb was not top of our priority list!
