Buccaneer Flow Control
Thread Starter
Join Date: Aug 2007
Location: LGW
Age: 38
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Buccaneer Flow Control
Ladies and Gents,
I'm in the process of writing a final year thesis related to flow control, and would appreciate a little bit of help. Can anyone provide me with, or point me in the direction of, any info on the flow control system used on the Blackburn Buccaneer please?
Thanks very much in advance,
l5otg
I'm in the process of writing a final year thesis related to flow control, and would appreciate a little bit of help. Can anyone provide me with, or point me in the direction of, any info on the flow control system used on the Blackburn Buccaneer please?
Thanks very much in advance,
l5otg
Join Date: Jul 1999
Location: 58-33N. 00-18W. Peterborough UK
Posts: 3,040
Likes: 0
Received 0 Likes
on
0 Posts
Here's some kick-off info you may not have found.
The Blackburn Buccaneer
Low-level flight demands an aircraft with small wings and high wing loading to reduce bumpiness from gusts and turbulence, but carrier takeoff and landing generally demands large wings and low wing loading to ensure short takeoff, and slow landing speeds. Blackburn compromised by using a small wing that incorporated a "flap blowing" or "boundary layer control (BLC)" system.
The BLC system used a network of ducts that bled ten percent of the engine compressor flow and routed it to the leading edges of the wings and over the flaps and ailerons. It also directed engine bleed air to the underside of the high-set "tee" tail. The BLC system almost doubled lift at low airspeed, and also provided an effective de-icing system.
The Blackburn Buccaneer
Low-level flight demands an aircraft with small wings and high wing loading to reduce bumpiness from gusts and turbulence, but carrier takeoff and landing generally demands large wings and low wing loading to ensure short takeoff, and slow landing speeds. Blackburn compromised by using a small wing that incorporated a "flap blowing" or "boundary layer control (BLC)" system.
The BLC system used a network of ducts that bled ten percent of the engine compressor flow and routed it to the leading edges of the wings and over the flaps and ailerons. It also directed engine bleed air to the underside of the high-set "tee" tail. The BLC system almost doubled lift at low airspeed, and also provided an effective de-icing system.
Join Date: Aug 2007
Location: East England
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
From what I remember.... flow control....more a case of the engines flat out to give the puff required on the Wings, flaps, tail!!! Bloody marvellous aircraft, learnt a lot on them in my early days!!!
Join Date: Jun 2001
Location: due south
Posts: 1,332
Likes: 0
Received 0 Likes
on
0 Posts
From Spitfire To Eurofighter by Roy Boot (ISBN 1 85310 093 5) has three chapters about the Buccaneer.
Boot worked for Blackburn from 1949 to 1978, leading the Future Projects Office when the NA39 emerged, and he played a prominent role in the development of that design into the Buccaneer.
Boot worked for Blackburn from 1949 to 1978, leading the Future Projects Office when the NA39 emerged, and he played a prominent role in the development of that design into the Buccaneer.