Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

A320 Eng/APU Fire Control Panel Light


Notices
Tech Log The very best in practical technical discussion on the web

A320 Eng/APU Fire Control Panel Light

Old 22nd October 2008 | 18:08
  #1 (permalink)  
Thread Starter
15 Anniversary
 
Joined: Dec 2007
Posts: 210
Likes: 20
From: Denver, Colorado, USA
A320 Eng/APU Fire Control Panel Light

Stuck again, and need some help.
We have a single lamp out in our A320 Simulator's Eng/APU fire panel, the Engine #1, Agent #1, Left hand DISCH light, It has a broken spring that cannot be fixed. Looks like all of DISCH lights are the same, but no one can verify the part number of the switch. Looked up the part number in the A-320 IPC and it shows P/N: E0415B3E for the switch and 0L718297 for the lamp. Did some internet searching, and the part number that comes up is ASNE0415B3E.

No one seems to want to sell just one little switch. Any ideas?
mnttech is offline  
Reply
Old 22nd October 2008 | 19:55
  #2 (permalink)  
25 Anniversary
 
Joined: May 2000
Posts: 1,021
Likes: 2
From: Glorious West Sussex
Have you tried asking the simulator manufacturer?
TyroPicard is offline  
Reply
Old 22nd October 2008 | 20:18
  #3 (permalink)  
Community Builder
Community Influencer
30 Countries Visited
20 Anniversary
 
Joined: Feb 2002
Aviation Qualifications: AME
Posts: 4,182
Likes: 1,116
From: UK
Ebay???
TURIN is offline  
Reply
Old 22nd October 2008 | 23:04
  #4 (permalink)  
Thread Starter
15 Anniversary
 
Joined: Dec 2007
Posts: 210
Likes: 20
From: Denver, Colorado, USA
All the MFG does is buy the whole box, about 20K US, and they don't have a parts break down
mnttech is offline  
Reply
Old 23rd October 2008 | 22:55
  #5 (permalink)  
20 Anniversary
 
Joined: Mar 2005
Posts: 731
Likes: 0
From: England
The part number you have is correct. (E0415B3E switch body / E0418M049E lens cap)

Try thisr place.

INTERTURBINE LOGISTIK GMBH
KISDORFER WEG 36-38
24568 KALTENKIRCHEN D

Tel 49-4191-809-533

Interturbine Group of Companies

[email protected]

You can definitely get the switches separately, i've changed quite a few over the years.
Fargoo is offline  
Reply
Old 26th October 2008 | 16:30
  #6 (permalink)  
Thread Starter
15 Anniversary
 
Joined: Dec 2007
Posts: 210
Likes: 20
From: Denver, Colorado, USA
Thanks Fargoo, we will give them a try.
mnttech is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.