737-800 Hydraulics
Thread Starter
Joined: Jul 2006
Posts: 123
Likes: 0
From: Norway
737-800 Hydraulics
Hello
Our FCOM states that the electric hydraulic pumps should be switched on in sequence 1 - 2, and switched off in sequence 2 - 1, to minimise the transfer of hydraulic fluid between system A and B.
It isn't a problem operationally from what I've heard, but a procedure we utilise to not create an increased workload on the tech staff.
My guess is that there has to be a check valve somewhere in one of the hydraulic systems, but I haven't figured out which one.
Does anyone here know which system?
All inputs are welcome
Our FCOM states that the electric hydraulic pumps should be switched on in sequence 1 - 2, and switched off in sequence 2 - 1, to minimise the transfer of hydraulic fluid between system A and B.
It isn't a problem operationally from what I've heard, but a procedure we utilise to not create an increased workload on the tech staff.
My guess is that there has to be a check valve somewhere in one of the hydraulic systems, but I haven't figured out which one.
Does anyone here know which system?
All inputs are welcome
Joined: Dec 2000
Posts: 523
Likes: 0
From: very close to STN!!
never seen that--
i've been on 737's since the early 90's, 100,200,300,400,500 and now the 800 and i have never seen that in any books i have been given.
must be a company added change and someone in your company should know.
must be a company added change and someone in your company should know.
Thread Starter
Joined: Jul 2006
Posts: 123
Likes: 0
From: Norway
Yes.. I got the impression this was company - specific. One wouldn't find it in the FCTM.
I'll try our tech staff, but if anyone knows about the procedure please let me know.
I would appreciate it
I'll try our tech staff, but if anyone knows about the procedure please let me know.
I would appreciate it
Joined: Jan 2002
Posts: 960
Likes: 0
From: Brisbane, Australia
Yeah...
with the brakes,
if you set the park brake with system B, then secure sys B,
turn on sys A, and release the park brake, there will be a small transfer of hydraulic fluid, or vice versa!
The same effect will be had with the reversers, since they can be operated open with a 'normal' hydraulic system, depending on the side, and closed with the standby system.
But these are things one would do intentionally, not something done unintentionally!
In response to your Q, I don't know of any otherway to transfer fluid from one hyd sys to another, on the 737NG.
Think of your current procedure when being pushed/towed without the steering disconnect pin in place, don't you toggle the system A pumps off and on, without changing the on status of system B!
Cheers...FD...
with the brakes,
if you set the park brake with system B, then secure sys B,
turn on sys A, and release the park brake, there will be a small transfer of hydraulic fluid, or vice versa!
The same effect will be had with the reversers, since they can be operated open with a 'normal' hydraulic system, depending on the side, and closed with the standby system.
But these are things one would do intentionally, not something done unintentionally!
In response to your Q, I don't know of any otherway to transfer fluid from one hyd sys to another, on the 737NG.
Think of your current procedure when being pushed/towed without the steering disconnect pin in place, don't you toggle the system A pumps off and on, without changing the on status of system B!
Cheers...FD...
Thread Starter
Joined: Jul 2006
Posts: 123
Likes: 0
From: Norway
Hello
Thanks Cough and FD.
Cough was right. I spoke to one of our techs who said the initial thought was to limit fluid transfer via the brake shuttle valve.
On the other hand the applicability of the procedure is questionable since the unpressurized system pressure must drop below 1500 psi before the brake shuttle valve shifts hydraulic source.
Thanks Cough and FD.
Cough was right. I spoke to one of our techs who said the initial thought was to limit fluid transfer via the brake shuttle valve.
On the other hand the applicability of the procedure is questionable since the unpressurized system pressure must drop below 1500 psi before the brake shuttle valve shifts hydraulic source.
Per Ardua ad Astraeus
Joined: Mar 2000
Posts: 18,575
Likes: 4
From: UK
Yer can always rely on Capt 'S' 
Hydraulics
Hydraulics
