Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

Them bogie things

Tech Log The very best in practical technical discussion on the web

Them bogie things

Old 16th Apr 2008, 00:58
  #1 (permalink)  
Thread Starter
 
Join Date: Feb 2004
Location: A place with no name
Age: 46
Posts: 144
Likes: 0
Received 0 Likes on 0 Posts
Them bogie things

Reading a recent post on the clunk type noises heard during taxi it rekindled a question I have about the bogies on the big jets...

My trusty 182 turns on the ground by directional manipulation of the nosewheel. Easy stuff. Landing in a crosswind I land on one of the mains first, then the second and finally the nosewheel. (If I'm doing a crosswind on a good day).

Doing said manouevre (sp?) in a 777 for example, would put a substantial amount of pressure on the one bogie which it can obviously take cos I have seen it happen (albeit gently done). My question is, though, do the main bogies turn as well, and if so how is their direction controlled? Are they turned during the taxi as well?
SoundBarrier is offline  
Old 16th Apr 2008, 02:22
  #2 (permalink)  
 
Join Date: Feb 2008
Location: Wingham NSW Australia
Age: 83
Posts: 1,343
Likes: 0
Received 0 Likes on 0 Posts
Turning Gear

Hi Sound Barrier. Can't comment on the B777 which has two triple axle main undercarriage trucks (total 12 main landing gear wheels) and I seem to recall reading that these are steerable to relieve loads on the inside truck in turns, but would certainly be locked in the "straight ahead" position for take-off and landing. The B747, which has four two axle main landing gear trucks (total 16 main gear wheels) of which two are body mounted gear and the other two are wing mounted. The body gear are able to be steered in turns to relieve stress, however the wing gear do not. The body gear are locked in the "straight ahead" position for take-off and landing. As for landing on "into wind" main gears first in X-wind conditions this is normal practice and is easily handled by the main landing gear assemblies. On an aircraft such as the B52, to assist in X-wind landings the aircraft can be landed with a fair degree of drift on, as the landing gear is able to be offset to align with the runway, even though longitudinally the aircraft is not. Nose wheel steering in large aircraft is often linked to the rudder system "Rudder fine steering" for ease of taxying and for larger correstions the "tiller" or nose gear steering wheel is used. Hope this is helpful. Happy landings.
Old Fella is offline  
Old 16th Apr 2008, 08:06
  #3 (permalink)  
 
Join Date: Apr 2008
Location: Australia
Posts: 343
Likes: 0
Received 0 Likes on 0 Posts
The 777 has the rear axle which is steerable to eleviate stress on the gear structure
Engineer_aus is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.