Roll-rates
Thread Starter
Join Date: Jan 2005
Location: north
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Roll-rates
Hi all,
For simulation purposes I'm having problems finding
any good documentation on actual rollrates (degrees/sec) on
airliners. Can't find anything in the AOM/POH's.
The pilots we have testing the models give us an indication,
but for some reason they seem to disagree ALOT.. .
e.g on the 757 the estimates vary from 20-30 deg/s to 90 deg/s!
Of most interest is the 757 and MD80, but other types are
of interest as well.
Can anyone help?
Cheers,
M
For simulation purposes I'm having problems finding
any good documentation on actual rollrates (degrees/sec) on
airliners. Can't find anything in the AOM/POH's.
The pilots we have testing the models give us an indication,
but for some reason they seem to disagree ALOT.. .
e.g on the 757 the estimates vary from 20-30 deg/s to 90 deg/s!
Of most interest is the 757 and MD80, but other types are
of interest as well.
Can anyone help?
Cheers,
M
Join Date: Aug 2007
Location: way down south
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
If you are interested the max roll rate for the A330/A340 is 15 degrees/second with the sidestick at max deflection & limited to 67 degrees in normal law with spiral stability introduced at 33 degrees. The rate is a bit more in direct law.
Albeit a sort of small airliner, the Bombardier Global Express can achieve almost 200deg/sec! Big ailerons and a great set of multifunction spoilers! I'll borrow a stopwatch and try to find an exact answer.
Join Date: Jan 2005
Location: France
Posts: 2,315
Likes: 0
Received 0 Likes
on
0 Posts
XPMorten,
You may have to be a bit more specific.
There are vast differences between max raw roll rates with fully manual control inputs and what you get in various A/P modes or with FBW.
You may have to be a bit more specific.
There are vast differences between max raw roll rates with fully manual control inputs and what you get in various A/P modes or with FBW.
Join Date: Sep 2002
Location: La Belle Province
Posts: 2,179
Likes: 0
Received 0 Likes
on
0 Posts
Might be useful to have flight conditions and aircraft weights and inertias too. And configurations.
And one reason I *hope* for pilots disagreeing about maximum roll rates on a given civilian airliner is that they shouldn't actually have ever done it!
And one reason I *hope* for pilots disagreeing about maximum roll rates on a given civilian airliner is that they shouldn't actually have ever done it!
Thread Starter
Join Date: Jan 2005
Location: north
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the reply's guy's
I'm looking for hands on (non AP) rollrates. The purpose
is to try to get the "feel" of the simulation right.
Any info on any configuration/weight will help.
We can set up the acf to match the situation you might
have information on and calibrate it there.
Like Mad flt says, if MAX CW deflection is hardly ever used,
rollrates in the "normal envelope" will do fine.
Found this that gives an indication on the B764;
http://cf.alpa.org/internet/alp/2001/feb01p22.htm
The first was a check of roll rate in bank-to-bank rolls from 30 degrees to 30 degrees at ˝ wheel deflection. Flying the clean airplane at 350 knots, bank-to-bank took 4 seconds, for a roll rate of 15 degrees per second. Here is where a sharp control input initiated an aeroelastic response from the airframe. A later check of this same maneuver with flaps 30 at Vref=136 gave a bank-to-bank time of 6 seconds, or a roll rate of 10 degrees per second. This excellent response at slow speed in the landing configuration is another indication of the exceptional handling qualities of this airplane.
Cheers,
M
I'm looking for hands on (non AP) rollrates. The purpose
is to try to get the "feel" of the simulation right.
Any info on any configuration/weight will help.
We can set up the acf to match the situation you might
have information on and calibrate it there.
Like Mad flt says, if MAX CW deflection is hardly ever used,
rollrates in the "normal envelope" will do fine.
Found this that gives an indication on the B764;
http://cf.alpa.org/internet/alp/2001/feb01p22.htm
The first was a check of roll rate in bank-to-bank rolls from 30 degrees to 30 degrees at ˝ wheel deflection. Flying the clean airplane at 350 knots, bank-to-bank took 4 seconds, for a roll rate of 15 degrees per second. Here is where a sharp control input initiated an aeroelastic response from the airframe. A later check of this same maneuver with flaps 30 at Vref=136 gave a bank-to-bank time of 6 seconds, or a roll rate of 10 degrees per second. This excellent response at slow speed in the landing configuration is another indication of the exceptional handling qualities of this airplane.
Cheers,
M
Thread Starter
Join Date: Jan 2005
Location: north
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Why would real world roll-rates matter in a simulation, where joystick settings are probably as varied as there are users?
- We give recommended settings for our models which is only a couple of parameters.
- The envelope in which you can adjust sensitivity is probably only
a few deg/s, so if the model is off, you cant adjust your way back in.
In other words, if the model is off, you'll notice.
Offcourse spring force, controls travel etc will vary from what equipment you
have. But the point is that for a given % of deflection on any joystick
or yoke you should have an in the ballpark rollrate.
An similar example from real is the 75 and 76. The 767 has half the Control Wheel deflection (45 deg) as the 757 does (85 deg). So the 767 will FEEL
more sensitive than the 757, but they probably have similar roll rates for the
same PERCENT of control wheel deflection.
M