Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

737 Landing climb

Tech Log The very best in practical technical discussion on the web

737 Landing climb

Old 4th Dec 2006, 16:34
  #1 (permalink)  
Thread Starter
 
Join Date: Sep 2001
Location: my house
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
737 Landing climb

Right. This one's quite dull, so brace yourself:

What is the JAR OPS Landing Climb requirement for a perf A aeroplane?

JAR 1.510 has 2 Approach climb requirements - (That the a/c must be able to meet the missed approach climb gradient if it is larger than 2.5%, and a minimum MACG of 2.5% for approaches with a DH of >200'). These are for one engine inoperative.

The 'Appendix to 1.525' specifies a 3.2% Landing climb gradient (all engines, gear and flap in landing config). But I think this only applies to Perf B aeroplanes.

I can't find anything about the landing climb for Perf A, probably because I'm looking in the wrong place.

What am I getting at? Our performance dispatch for 737 classics (not certified under JAR) has a landing climb graph, with a fairly onerous penalty for a DH less than 200'. The 737NG landing climb graph (JAR certified) has no correction for low DHs, and I'm trying to get to the bottom of why. These are both Boeing graphs, by the way, and probably fairly standard for all operators.

Can anyone help?
fogatgatwick is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.