Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

Landing distance calculation for turboprop?

Wikiposts
Search

Notices
Tech Log The very best in practical technical discussion on the web

Landing distance calculation for turboprop?

Thread Tools
 
Search this Thread
 
Old 3rd December 2006 | 14:51
  #1 (permalink)  
Thread Starter
 
Joined: Jan 2006
Posts: 364
Likes: 0
From: EU
Landing distance calculation for turboprop?

I was doing a couple of exams today and came across the question of landing distance for a turboprop when the runway is contaminated.

Basic rule is that only 70% should be used for landing distance calculations when rwy is contaminated.

The runway is 2200 m long, I used 2200 x 0,7 = 1540, but the correct answer was 1339... why?
Founder is offline  
Reply
Old 3rd December 2006 | 15:36
  #2 (permalink)  
 
Joined: Oct 2005
Posts: 26
Likes: 0
From: London
Hi there,

You also need to reduce the distance by 15% due to contamination.

Good luck with the exams.
just_go_to is offline  
Reply
Old 3rd December 2006 | 15:40
  #3 (permalink)  
Thread Starter
 
Joined: Jan 2006
Posts: 364
Likes: 0
From: EU
Originally Posted by just_go_to
Hi there,
You also need to reduce the distance by 15% due to contamination.
Good luck with the exams.
ah, I knew that, why didn't I think of it =(

Many thanx for your help =)
Founder is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.