How about a "deployable" thrust reverser - new GE AD
Thread Starter
Joined: Aug 2005
Posts: 216
Likes: 0
From: SEA (or better PAE)
How about a "deployable" thrust reverser - new GE AD
Hello all.
Here is a new AD we expected to see for some time.
I hope nobody would be exposed to its potential cause.
Cheers
******************************************************
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 777-200 series airplanes equipped with General Electric GE90-94B engines.
This AD requires inspecting to determine the part number of the identification plate of the torque box on the thrust reversers (TRs), and investigative and corrective actions if necessary. This AD results from engine certification testing which revealed that TRs on GE90–94B engines have inner walls that could develop disbonding in the upper bifurcation radii. Disbonding was found in an equivalent inner wall used during the testing.
We are issuing this AD to prevent failure of a TR and adjacent components and their consequent separation from the airplane during flight or during a refused takeoff (RTO).
These separated components could cause structural damage to the airplane or damage to other airplanes and possible injury to people on the ground. TR failure during a RTO could also cause the engine to produce forward thrust, resulting in asymmetric thrust and possible runway excursion.
Here is a new AD we expected to see for some time.
I hope nobody would be exposed to its potential cause.
Cheers
******************************************************
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 777-200 series airplanes equipped with General Electric GE90-94B engines.
This AD requires inspecting to determine the part number of the identification plate of the torque box on the thrust reversers (TRs), and investigative and corrective actions if necessary. This AD results from engine certification testing which revealed that TRs on GE90–94B engines have inner walls that could develop disbonding in the upper bifurcation radii. Disbonding was found in an equivalent inner wall used during the testing.
We are issuing this AD to prevent failure of a TR and adjacent components and their consequent separation from the airplane during flight or during a refused takeoff (RTO).
These separated components could cause structural damage to the airplane or damage to other airplanes and possible injury to people on the ground. TR failure during a RTO could also cause the engine to produce forward thrust, resulting in asymmetric thrust and possible runway excursion.
Joined: Mar 2002
Posts: 4,569
Likes: 1
From: Florida
Hello all.
Here is a new AD we expected to see for some time.
I hope nobody would be exposed to its potential cause.
Cheers
******************************************************
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 777-200 series airplanes equipped with General Electric GE90-94B engines.
This AD requires inspecting to determine the part number of the identification plate of the torque box on the thrust reversers (TRs), and investigative and corrective actions if necessary. This AD results from engine certification testing which revealed that TRs on GE90–94B engines have inner walls that could develop disbonding in the upper bifurcation radii. Disbonding was found in an equivalent inner wall used during the testing.
We are issuing this AD to prevent failure of a TR and adjacent components and their consequent separation from the airplane during flight or during a refused takeoff (RTO).
These separated components could cause structural damage to the airplane or damage to other airplanes and possible injury to people on the ground. TR failure during a RTO could also cause the engine to produce forward thrust, resulting in asymmetric thrust and possible runway excursion.
Here is a new AD we expected to see for some time.
I hope nobody would be exposed to its potential cause.
Cheers
******************************************************
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 777-200 series airplanes equipped with General Electric GE90-94B engines.
This AD requires inspecting to determine the part number of the identification plate of the torque box on the thrust reversers (TRs), and investigative and corrective actions if necessary. This AD results from engine certification testing which revealed that TRs on GE90–94B engines have inner walls that could develop disbonding in the upper bifurcation radii. Disbonding was found in an equivalent inner wall used during the testing.
We are issuing this AD to prevent failure of a TR and adjacent components and their consequent separation from the airplane during flight or during a refused takeoff (RTO).
These separated components could cause structural damage to the airplane or damage to other airplanes and possible injury to people on the ground. TR failure during a RTO could also cause the engine to produce forward thrust, resulting in asymmetric thrust and possible runway excursion.
Sounds like a hell of a stretch to mandate a corrective action for nothing more than a minor single system malfunction.
This doesn't sound anymore major then a wheel failure on one side of the aircraft. There is redundancy on top of redundancy to keep this from being an accident. If I recall, the MD11 had spewn out quite a few parts from its reversers with nothing more than a flat tire to somebody coming in shortly afterwards
I'm not against fixing problems, but there is a need for using the AD process sparingly so that the right problems can be managed with available resources.
