Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

vary weight radius of turn


Notices
Tech Log The very best in practical technical discussion on the web

vary weight radius of turn

Old 22nd June 2006 | 04:45
  #1 (permalink)  
Thread Starter
 
Joined: Jan 2006
Posts: 17
Likes: 0
From: Columbia
vary weight radius of turn

Two aircraft flying at a constant IAS, altitude, temperature, Angle of bank.

One heavier than the other, which has a greater radius of turn?
I think that the radius of turn is the same as it depends on the speed not the weight.

Also which one will have a greater Load factor.

Your thoughts and theories?
fastflaps40 is offline  
Old 22nd June 2006 | 05:37
  #2 (permalink)  
 
Joined: Mar 2006
Posts: 13
Likes: 0
From: Ormond Beach
Weight has no effect on radius of turn, nor on load factor.
flyboyike is offline  
Old 22nd June 2006 | 07:28
  #3 (permalink)  
 
Joined: Aug 2001
Posts: 775
Likes: 0
From: Dorset
Radius of turn = (TAS squared) / (gTan AOB)

The two aircraft are at the same IAS and altitude so (if we ignore the possibility of temperature differences) we can assume that their TAS are also equal.

If you look at the above equation you will see that weight plays no part in determining the radius. So at the same AOB and TAS both will have the same radius of turn.

In a constant altitude banked the load factor = 1/Cos AOB. In this case both have the same AOB so both have the same load factor.
Keith.Williams. is offline  
Old 22nd June 2006 | 12:07
  #4 (permalink)  
20 Anniversary
 
Joined: Feb 2005
Posts: 4,581
Likes: 0
From: flyover country USA
I once made a nomograph (remember those?) to quickly define this problem's solution. Keith & Ike have it right.
barit1 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.