Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

Channels and Frequencies


Notices
Tech Log The very best in practical technical discussion on the web

Channels and Frequencies

Old 15th January 2006 | 17:43
  #21 (permalink)  
LGB
 
Joined: Feb 2002
Posts: 178
Likes: 1
From: -
Re: Channels and Frequencies

Too late, and unrealistic, but since it doesn't really matter what the frequencies are, they could all have had a sequential number instead of the actual frequency.

With four digits there are 10000 combinations, far more than there are frequencies even at 8.33 (2280, less the ones unused around 121.5). If it had been easy with a letter, it could even have been 2 numbers and one letter, like "change to Kilo 2 9". But then a dial with 25 letters makes it too complicated.

But with 4 digits 0 to 9, we could have saved two digits, but unrealistic, because think of all the work and hazzle, changing all these aircraft radios!
LGB is offline  
Old 15th January 2006 | 17:48
  #22 (permalink)  
Community Builder
Community Influencer
20 Anniversary
 
Joined: Nov 2005
Aviation Qualifications: PPL
Posts: 12,458
Likes: 368
From: Wildest Surrey
Re: Channels and Frequencies

Yes some pilots, mostly from the USA, do drop it. I (as a controller using only VHF) am not going to complain, but the official line is NO, because of the fact IF you were working a military unit, and they were also using UHF frequencies which begin with 2 or 3, then it 'could' cause confusion.
chevvron is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.