Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

Air on a G String...

Wikiposts
Search
Tech Log The very best in practical technical discussion on the web

Air on a G String...

Thread Tools
 
Search this Thread
 
Old 30th Aug 2005, 05:45
  #1 (permalink)  
Ecce Homo! Loquitur...
Thread Starter
 
Join Date: Jul 2000
Location: Peripatetic
Posts: 17,418
Received 1,593 Likes on 730 Posts
Air on a G String...

New Scientist - 27th Aug:

Singing wings could reduce the number of fatal crashes of small aircraft. The idea is to prevent the plane stalling by applying a piezoelectric film to the wings to help maintain a smooth airflow.

Stalls account for around one-quarter of fatalities involving small planes, and are caused by a loss of lift when an aircraft turns too tightly or too flies too slowly. "The air can no longer remain attached to the wing and it tends to break off in large sheets", says ian Salmon, an engineer with Qantas Airways in Sydney, Australia, who conducted the research while at the University of New South Wales.

Applying an electric current to the film causes it to vibrate, which produces the sound and makes it less likely that the airflow will break away. Tests using a sinusoidal tone of about 400 hertz (close to the G above middle C) showed an increase in lift of 22 per cent.
ORAC is offline  
Old 30th Aug 2005, 06:04
  #2 (permalink)  
 
Join Date: May 1999
Location: Quite near 'An aerodrome somewhere in England'
Posts: 26,817
Received 270 Likes on 109 Posts
Isn't that why the Islander was such a good STOL aircraft? The intense vibration throughout the structure causing the increase in lift coefficient of which you speak?

There was a good spoof once posted about why this droning old device was so successful.
BEagle is offline  
Old 30th Aug 2005, 15:22
  #3 (permalink)  
 
Join Date: Aug 2005
Location: SEA (or better PAE)
Posts: 215
Likes: 0
Received 0 Likes on 0 Posts
As long as someone on production side decides to do a detailed vibration analysis it would be good idea.

Somehow most of the engineering world inside big (and little as well) manufacturers is concentrated on static loads meaning they approach a/c structure as not exposed to vibrations. Rarely you will see something done on that side.

As long as there are no problems it is OK.

Islander is or better was an exception since someone actually bothered to look into that.

Cheers
Grunf is offline  
Old 30th Aug 2005, 20:55
  #4 (permalink)  
 
Join Date: Jan 2004
Location: Sleepy Hollow
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Islander noise/vibration

The noise and vibration was designed in to the Islander/Defender on purpose.

They realised that Concorde performed well, and was noisy. Therefore in order for the BN2 series to perform well it needed to be noisier.

If you think I am wrong think about the Trilander. That third engine is only there for the extra noise.
Fatty is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.