A320 Question
Joined: Oct 2000
Posts: 144
Likes: 0
Its been a while but.... if you have the ADIR's in the off position on the ground you will see that the XXX are there on the APU bleed indicator.
To my recollection it is due to a piggy back of the static port throught the ADIR, with them powered off the static system is not charged therefore no base figure for the APU bleed....check the press page too...simular reactions there.
To my recollection it is due to a piggy back of the static port throught the ADIR, with them powered off the static system is not charged therefore no base figure for the APU bleed....check the press page too...simular reactions there.
