Where do i have to put my feets?
Thread Starter
Join Date: Mar 2004
Location: argentina
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Where do i have to put my feets?
My question is simple. I 've been read the flight crew trainning manual and it 's say that on taxi you have to put your feets on the floor and touch the brakes the minumun as posible. But it isn't say nothing about how do you have to put your feets in the takeoff run?
Sorry about my english.
Thank you.
Pablo
Sorry about my english.
Thank you.
Pablo
Join Date: Aug 2000
Location: UK
Posts: 1,914
Likes: 0
Received 0 Likes
on
0 Posts
Pablo, you must be able to touch the brakes immediately when you taxy. On the take-off run, you must not be touching the brake at all. If you have a crosswind on takeoff with a lot of rudder pushed on, there is a danger you may press that toe brake. So you must have both heels on the floor for take-off. I have had a take-off abandoned in a 4 engine jet because the other pilot was pushing a rudder pedal hard and had pressed the brake too. It is easy to do.
Your English is better than our Spanish!
Your English is better than our Spanish!
Join Date: Nov 2003
Location: Turkey
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
An inadvertant push of brakes during the taxi is something you'll never want to do.I did that in my initial 737 training,I wanted to taste the feeling of the braking action so I asked the instructor captain if I can do the braking for once.He said OK but even though I tried to be gentle my inexperienced feet did a terrible job and for a moment it felt like the airplane hits to a wall.So I learnt it the hard way.
Its better to keep the heels on the floor as perfectly explained by "Notsofantastic"
Its better to keep the heels on the floor as perfectly explained by "Notsofantastic"
Join Date: May 2000
Location: SV Marie Celeste
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
Pablo (paisano),
This is what I do. If it is my T/O I put my heels on the bottom of the pedals with the toes barely touching the brakes. I want to be able to stop if I have to and I don´t want to be looking for the brakes at 130kts. I know that usually the autobrake will do the job but in case it doesn´t activate. If It is not my T/O I rest my feet on the bottom of the pedals and follow what the other guy is doing, in case of incapacitation I can take over but (hopefully) the other guy cannot feel any extra pressure on the pedals.
In my experience it takes a couple of centimetres of travel before you activate the brakes in the 737 (that is why it is quite difficult to be progressive with them).
We do not taxi from the right hand seat, so while taxing I keep my feet in the floor.
I agreee that pressing the brakes inadvertently during the T/O is not recomended
This is what I do. If it is my T/O I put my heels on the bottom of the pedals with the toes barely touching the brakes. I want to be able to stop if I have to and I don´t want to be looking for the brakes at 130kts. I know that usually the autobrake will do the job but in case it doesn´t activate. If It is not my T/O I rest my feet on the bottom of the pedals and follow what the other guy is doing, in case of incapacitation I can take over but (hopefully) the other guy cannot feel any extra pressure on the pedals.
In my experience it takes a couple of centimetres of travel before you activate the brakes in the 737 (that is why it is quite difficult to be progressive with them).
We do not taxi from the right hand seat, so while taxing I keep my feet in the floor.
I agreee that pressing the brakes inadvertently during the T/O is not recomended
Last edited by calypso; 31st Mar 2004 at 16:43.
Join Date: Oct 2001
Location: planet earth
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
WING.
YOURE INSTRUCTER SHOULD HAVE TOLD YOU THAT THOSE BRAKES ARE CARBON.MEANING WHEN YOU APPLY SLIGHT PRESSURE ON THE BRAKES NOTHING HAPPENS UNTIL THEY WARM UP THEN THEY WORK. SO IN OTHER WORDS THERE IS A TIME LAG .
YOURE INSTRUCTER SHOULD HAVE TOLD YOU THAT THOSE BRAKES ARE CARBON.MEANING WHEN YOU APPLY SLIGHT PRESSURE ON THE BRAKES NOTHING HAPPENS UNTIL THEY WARM UP THEN THEY WORK. SO IN OTHER WORDS THERE IS A TIME LAG .
I do the same as Calypso.
If you have to abort the takeoff it's usually in a hurry. The less time it takes to put the brakes on the better - It can make the difference between running off the runway and not.
If you have to abort the takeoff it's usually in a hurry. The less time it takes to put the brakes on the better - It can make the difference between running off the runway and not.
Join Date: Nov 2003
Location: Turkey
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Capt.magoo,
In my Boeing manuals I couldn't find any information about a warm up time needed before using the brakes otherwise they won't work.Although -since we don't do taxying from the right side in 737-I don't use the brakes too much during taxi but most of the times the brakes are already warm from the previous landing.
In the experience I stated was contraverse what you said I applied not too much pressure and the responce was quick instead of lacking and hard.It was the first time experience of an inexperienced copilot which tought me a valuable lesson.
If you please guide me where I can reach the information you provided I can add some to my knowledge.
Regards.WING737
In my Boeing manuals I couldn't find any information about a warm up time needed before using the brakes otherwise they won't work.Although -since we don't do taxying from the right side in 737-I don't use the brakes too much during taxi but most of the times the brakes are already warm from the previous landing.
In the experience I stated was contraverse what you said I applied not too much pressure and the responce was quick instead of lacking and hard.It was the first time experience of an inexperienced copilot which tought me a valuable lesson.
If you please guide me where I can reach the information you provided I can add some to my knowledge.
Regards.WING737
Join Date: May 2000
Location: SV Marie Celeste
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
Not all 737's have carbon brakes. I beleive that the NG's do but that in the classic they are an option. At least our 300's do not have them...
In the scenario of an engine failure before V1 and a limiting runway I cannot see how you can have your heels on the floor and yet do a max effort braking. You will need nifty footwork just to keep to the centerline, specially with asymetric reverse. At wich point are you going to be able to lift your feet from the pedals to find the brakes?. If the autobrake does not operate it is going to get very interesting, in any case max braking is always manual.
Any other views?
In the scenario of an engine failure before V1 and a limiting runway I cannot see how you can have your heels on the floor and yet do a max effort braking. You will need nifty footwork just to keep to the centerline, specially with asymetric reverse. At wich point are you going to be able to lift your feet from the pedals to find the brakes?. If the autobrake does not operate it is going to get very interesting, in any case max braking is always manual.
Any other views?
Join Date: Jun 2003
Location: Australia
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
I have tried both methods on takeoff in various aircraft types. In general, I feel more comfortable with heels on the floor because I can make finer adjustments to rudder deflection.
The main risk being discussed seems to be associated with a slight delay in braking. On the B737, there is a two second period allowed to establish the stopping configuration (3 seconds on more recently certified aircraft like the A320). IMHO, the 'heels on floor' method is low risk because a number of events would need to coincide before it was a problem, including:
1. The autobrakes would have to fail.
2. I would have to be relatively slow in applying maximum braking.
3. A failure would have to occur very close to V1.
4. The TORA would have to be a balanced field or close to it.
While this is not inconceivable, I am not sure if the risks of dragging a brake on takeoff are outweighed by the risks of 'heels on floor', particularly as I rarely see a balanced field (normally atleast 1000' to spare).
All that aside, if there is some objective data available I am keen to see it.
The main risk being discussed seems to be associated with a slight delay in braking. On the B737, there is a two second period allowed to establish the stopping configuration (3 seconds on more recently certified aircraft like the A320). IMHO, the 'heels on floor' method is low risk because a number of events would need to coincide before it was a problem, including:
1. The autobrakes would have to fail.
2. I would have to be relatively slow in applying maximum braking.
3. A failure would have to occur very close to V1.
4. The TORA would have to be a balanced field or close to it.
While this is not inconceivable, I am not sure if the risks of dragging a brake on takeoff are outweighed by the risks of 'heels on floor', particularly as I rarely see a balanced field (normally atleast 1000' to spare).
All that aside, if there is some objective data available I am keen to see it.
Join Date: Nov 2001
Location: Front Left, Right and Center.
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
I agree with the post above.
Have ALWAYS been taught to taxi with heels on floor. The time it takes from having them there to applying brakes (under any circumstances) is in my opinion negligable.
If you don't know where the brakes are when your heels are on the floor (hence toes on bottom of rudder pedals) then I'd say you probably need "a little" more training.
Have ALWAYS been taught to taxi with heels on floor. The time it takes from having them there to applying brakes (under any circumstances) is in my opinion negligable.
If you don't know where the brakes are when your heels are on the floor (hence toes on bottom of rudder pedals) then I'd say you probably need "a little" more training.
Join Date: May 2000
Location: SV Marie Celeste
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
We do plenty of improved climb TO's where I can assure you the end of the runway looks very close at V1. In fact to the naked eye it looks like it would be impossible to stop, the figures tell otherwise though. Another potential hazard is a runway incursion.
Even if the figures allow a three second delay, this includes recognition, etc. You still will need to lift your feet from the pedals in order to reposition them further up. If you have a significant input on the pedals (due to a crosswind or an engine failure) you may not be ablle to release the pedals even momentarely without veering off the centreline.
I could reply to EL Peligroso likewise that if you think you may drag a brake on TO you might need some further training. It does not enhance the argument however. The problem is not finding the brakes but being able to release the control input to reposition your feet.
Even if the figures allow a three second delay, this includes recognition, etc. You still will need to lift your feet from the pedals in order to reposition them further up. If you have a significant input on the pedals (due to a crosswind or an engine failure) you may not be ablle to release the pedals even momentarely without veering off the centreline.
I could reply to EL Peligroso likewise that if you think you may drag a brake on TO you might need some further training. It does not enhance the argument however. The problem is not finding the brakes but being able to release the control input to reposition your feet.
Join Date: Nov 2003
Location: About 3000 below Midhurst SID I reckon
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
Please avoid harsh braking on taxy....
I heard of a incident where brakes were applied accidentally(although almost wet myself when I was told) ...
A colleague of mine, a CC member on a B737-3, decides that it is easier to balance at the overwings, during safety demo on taxy, by lodging his feet under the metal bag restraints under the aisle seats.
During a fairly fast taxy out, suddenly the brakes were slammed on, sending him leaning back fast. Grabbing the seats either side of him to stop him falling backwards onto the aisle floor, the seatbacks folded forwards forcing two pax into the brace position!! Ouch.
Wouldnt have been as funny if it hadnt have been for the fact the demo had just reached the part "if you hear the words brace, brace, you must take up this position immediately".
Mal mate, where are you now???!!!
A colleague of mine, a CC member on a B737-3, decides that it is easier to balance at the overwings, during safety demo on taxy, by lodging his feet under the metal bag restraints under the aisle seats.
During a fairly fast taxy out, suddenly the brakes were slammed on, sending him leaning back fast. Grabbing the seats either side of him to stop him falling backwards onto the aisle floor, the seatbacks folded forwards forcing two pax into the brace position!! Ouch.
Wouldnt have been as funny if it hadnt have been for the fact the demo had just reached the part "if you hear the words brace, brace, you must take up this position immediately".
Mal mate, where are you now???!!!
Join Date: Jun 2003
Location: Australia
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Calypso,
I take it you have your heels off the floor for each takeoff, routinely. I agree that improved climb looks very marginal, even on a long runway. I am interested in your experience using this technique in the aircraft and simulator.
Is this a personal technique or a company SOP?
Have you ever experienced any problems with it?
Is inadvertant brake application in a strong crosswind an issue?
I take it you have your heels off the floor for each takeoff, routinely. I agree that improved climb looks very marginal, even on a long runway. I am interested in your experience using this technique in the aircraft and simulator.
Is this a personal technique or a company SOP?
Have you ever experienced any problems with it?
Is inadvertant brake application in a strong crosswind an issue?
Join Date: Aug 2000
Location: UK
Posts: 1,914
Likes: 0
Received 0 Likes
on
0 Posts
With all civil designs I have seen, it is essential to have heels firmly on floor during take-off. If braking is needed, it takes an instant to raise the feet to press the toe brakes, with minimal movement of the rudder.
I was copilot to a pilot who twisted himself around in his seat to apply strong rudder on take off on a big jet in a powerful crosswind. Unbeknown to all of us, it inadvertently lifted that foot off the floor. To all our consternation, we were heading towards the side of the runway (09R) unable to get back towards the centreline. We wold have run off but Stop was called at 120 kts. He wasn't aware that his foot was off the floor and also pushing the toe brake. Keep them heels firmly on the floor! Why do you think the floor is so highly polished?
I was copilot to a pilot who twisted himself around in his seat to apply strong rudder on take off on a big jet in a powerful crosswind. Unbeknown to all of us, it inadvertently lifted that foot off the floor. To all our consternation, we were heading towards the side of the runway (09R) unable to get back towards the centreline. We wold have run off but Stop was called at 120 kts. He wasn't aware that his foot was off the floor and also pushing the toe brake. Keep them heels firmly on the floor! Why do you think the floor is so highly polished?
Join Date: May 2003
Location: The Roman Empire
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
I don't agree with Notso.
Keeping the heels on the floor during takeoff is no good for two reasons:
1) Immediate braking is required, and having to raise your feet invariably delays this manoeuver;
2) Even more important is the fact that in a strong crosswind you are already applying pressure on the pedals: raising your feet on the brakes is impossible without releasing that pressure, thus for a moment you'll have to leave the rudder free floating!
Keep your feet on the pedals, making a conscious effort not to press the brakes.
Of course if you plan to rely on autobrakes only that's another story, but what if the autobrake disarm?
The only 100% safe technique is to use RTO plus full manual braking thereafter.
LEM
Keeping the heels on the floor during takeoff is no good for two reasons:
1) Immediate braking is required, and having to raise your feet invariably delays this manoeuver;
2) Even more important is the fact that in a strong crosswind you are already applying pressure on the pedals: raising your feet on the brakes is impossible without releasing that pressure, thus for a moment you'll have to leave the rudder free floating!
Keep your feet on the pedals, making a conscious effort not to press the brakes.
Of course if you plan to rely on autobrakes only that's another story, but what if the autobrake disarm?
The only 100% safe technique is to use RTO plus full manual braking thereafter.
LEM
Join Date: May 2000
Location: SV Marie Celeste
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
Flare Armed,
My company does not have a specific SOP on this issue. I always put my feet on the pedals (ie off the floor) for TO, I make all the pressure with the heels of my feet. This isn't very hard as the pedals are at an angle to facilitate this. I have never had any problems with this technique either in the a/c or the sim.
In the 737 should you activate the brakes accidentally during TO you will certainly know about it in the form of a violent jolt. If this happens I guess it is beacause the pedals are adjusted to be to far from the seat. You will need then to strech the foot to achieve full rudder deflection. I always make sure that I can achieve full deflection with my heels.
Given the different views here I will ask the powers that be if there is a prefered technique.
Taxi is a diferent matter as the speeds are not critical and the steering is done form the steering wheel. In any case as I never taxi I keep my feet on the floor. I would only brake during taxi if I was asked or if we were about to run over an old lady ;-)
My company does not have a specific SOP on this issue. I always put my feet on the pedals (ie off the floor) for TO, I make all the pressure with the heels of my feet. This isn't very hard as the pedals are at an angle to facilitate this. I have never had any problems with this technique either in the a/c or the sim.
In the 737 should you activate the brakes accidentally during TO you will certainly know about it in the form of a violent jolt. If this happens I guess it is beacause the pedals are adjusted to be to far from the seat. You will need then to strech the foot to achieve full rudder deflection. I always make sure that I can achieve full deflection with my heels.
Given the different views here I will ask the powers that be if there is a prefered technique.
Taxi is a diferent matter as the speeds are not critical and the steering is done form the steering wheel. In any case as I never taxi I keep my feet on the floor. I would only brake during taxi if I was asked or if we were about to run over an old lady ;-)
Last edited by calypso; 5th Apr 2004 at 19:35.
Join Date: Aug 2000
Location: UK
Posts: 1,914
Likes: 0
Received 0 Likes
on
0 Posts
LEM, you may feel you have a point to make about holding your heels off the floor during T/O. If people try and follow your suggestion, I can guarantee we will see exploded tyres/hairy takeoffs/planes off runway/abandoned take-offs. On all 5 jet types and one turboprop I have flown, it has always been powerfully stressed to me to 'firmly keep heels on floor during take-off, and whatever you do, don't touch the toebrakes!' It may be more obvious if you do on the 737, but on heavy jets it will be insidious and you will not feel it. I have had a take-off abandoned because of it, and it involved tyre deflation too. All I can say is don't take any notice of personal speculation. If you do not have autobrakes, it takes but an instant to raise your feet a couple of inches to reach the toebrakes. But if you try and take off a heavy with any braking on, you are going to have a huge problem!
Your point 2 is quite wrong. You only have to press the upper part of the rudder pedal for braking. Push the pedal in a crosswind take off with heel off the floor and you have no way of knowing if you actually have applied braking pressure. By keeping your heel on the floor, you can only press the lower bar so no pressure is applied to the brake system.
I submit 4,700 hours experience on B737 200/400
Your point 2 is quite wrong. You only have to press the upper part of the rudder pedal for braking. Push the pedal in a crosswind take off with heel off the floor and you have no way of knowing if you actually have applied braking pressure. By keeping your heel on the floor, you can only press the lower bar so no pressure is applied to the brake system.
I submit 4,700 hours experience on B737 200/400
Join Date: May 2003
Location: The Roman Empire
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
There might be a misunderstanding in our explanations, as it's not so easy to tell what we exactly mean, also because of a language problem (in my case).
When I say heels off the floor, I don't mean feet all the way up, but the middle of the foot on the pedal hinge...
I hope you see what I mean... difficult to explain, a simple thing like that!
So actually the position I use is half foot off the pedal, half on the pedal.
Clear as mud, perhaps, but I submit 5000 hrs turboprop experience with reversible rudder control (that means the fu**ing gust is gonna push violently on your pedals, thus on your feet), and I can guarantee using the heels dragging on the floor technique in strong winds might make raising your feet to brake almost impossible!
Of course that's different with powered non reversible controls, and with autobrakes it's even easier.
Once again, I mean a half-half position....
When I say heels off the floor, I don't mean feet all the way up, but the middle of the foot on the pedal hinge...
I hope you see what I mean... difficult to explain, a simple thing like that!
So actually the position I use is half foot off the pedal, half on the pedal.
Clear as mud, perhaps, but I submit 5000 hrs turboprop experience with reversible rudder control (that means the fu**ing gust is gonna push violently on your pedals, thus on your feet), and I can guarantee using the heels dragging on the floor technique in strong winds might make raising your feet to brake almost impossible!
Of course that's different with powered non reversible controls, and with autobrakes it's even easier.
Once again, I mean a half-half position....
Join Date: Aug 2000
Location: UK
Posts: 1,914
Likes: 0
Received 0 Likes
on
0 Posts
On turboprops downward, you can feel absolutely any brake application at any power. It is not true for 737 and upward jets, and this is the danger of having any inadvertent braking on. You just can't always feel it. The only way to be absolutely sure is to have heels firmly pressed down and sliding on the floor so that only the bottom of the rudder pedal, or the lower bar, is touched, especially in a crosswind. Any different and you too will be calling out "Stop!" in a high pitched voice, except in our case it was 2 words, the second of which was "....Hell!". No more needed to be said!