Vnkt
Joined: May 2002
Posts: 36
Likes: 0
From: empty quater
VNKT
Hi aviatorpk,
the critacal part of the approach is from 10 to 4 nm on the approach rwy 02, it requires a rod of 2100fmn to meet the profile, which results in high ias/tas/Gs coupled with a tail wind component, high elavation effect is another factor. it is required to configure the a/c flaps full and gear down by noppen from where the approach for rwy 02 begins.this time of the year you get morning fog which clears by about 8 in morning. on the G/A do deviate from the procudere as the terrain is pretty close and pretty high.
hI AVATIORPK,
i meant do not deviate on the G/A prcedure, sorry
the critacal part of the approach is from 10 to 4 nm on the approach rwy 02, it requires a rod of 2100fmn to meet the profile, which results in high ias/tas/Gs coupled with a tail wind component, high elavation effect is another factor. it is required to configure the a/c flaps full and gear down by noppen from where the approach for rwy 02 begins.this time of the year you get morning fog which clears by about 8 in morning. on the G/A do deviate from the procudere as the terrain is pretty close and pretty high.
hI AVATIORPK,
i meant do not deviate on the G/A prcedure, sorry
