PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Spectators Balcony (Spotters Corner) (https://www.pprune.org/spectators-balcony-spotters-corner-52/)
-   -   Interesting Boeing Patent (https://www.pprune.org/spectators-balcony-spotters-corner/161150-interesting-boeing-patent.html)

speedbird_heavy 28th January 2005 17:48

Interesting Boeing Patent
 
Just stumbled across this on the Boeing website. Could this be their vision of the regional jet market?

Click here

Jetavia 28th January 2005 18:58

What you see is the patent for Boeings 2+3+2 cabin layout ..

This patent is most likely for the aircraft that will some day replace the 737NG and be build on the experience gathered from the 7E7 programme.

The patent will prevent Airbus from following Boeing and develop a twin isle 2+3+2 seat 737/A320 category aircraft :D

BEagle 28th January 2005 19:18

So it's a sort of '13 inches narrower than the A310' design, is it?

Pretty revolutionary, huh?

Could do better if tried.

RatherBeFlying 28th January 2005 19:33

Patent Pending
 
The name of the game is:

max bums/cabin area

Minimising aisle area/bum is one means to accomplish this.

I am preparing a patent that will place each bum with cabin baggage in a module with prepackaged meals, drinks and snacks that will then be automatically stacked into the cabin.

As each module is stacked, it will autoconnect to air and data services.

Multi-unit modules will be available for couples, families etc.

TSA will be much excited by the prospect of sealing the occupants into a module where they can do no mischief. The only security check needed will be for explosives which can be automatically detected by sampling the air from the module and diverting suspicious modules to the authorities.

That's after I figure out how to manage visits to the toilet:}

Desert Dingo 28th January 2005 19:38

I'm surprised that they didn't patent having pilot seats on the flight deck too. That would fix the competion!
They will want to patent having wings on aircraft next. :yuk:

surely not 28th January 2005 20:23

So if you can patent something like this, can I patent the 2 x table please :D

What a pathetic effort to hamper a competitor who is riding roughshod over you!!

Why not patent the idea of carrying passengers, that would be a real disadvantage for all competitors!!

Jetavia 28th January 2005 20:35

Any interesting patents held by airbus??

The patents are there for a reason, not to have anyone rib of your ideas, designs etc. However some patents are just to craizy like doctors wanting to patent the human DNA for instance..

BahrainLad 28th January 2005 21:27

I believe Airbus hold the patents for this.

Much more exciting.

broadreach 28th January 2005 21:50

RbF,
If you can devise a good autofeed system, no doubt in my mind you can do an equally effective autovac (autoevacuate?). Just remember to build in the autoairfreshener. ;-)
broadreach

RatherBeFlying 28th January 2005 23:42

BR

I expect Martin-Baker will be interested in supplying a rocket and parachute for the modules.

Adding an escape system to a buoyant module will remove the bother with slides and rafts.

Australia2 29th January 2005 01:00

Dingo,

I think the real interest in this area is from the airline managers who would like to patent a cockpit with no pilots seats. With no pilots, more accountants could be employed, and the airline surely more profitable !!

Oz2

:ok:

swh 29th January 2005 02:58

Looks like a 328Jet...

With the exception...they say ...

"A single isle configuration used in these current aeroplanes in these smaller classes minimizes drag, weight, fuel burn, and economic penalties"

So they put forward a twin isle jet, which is uneconomical on the basis it will have pax appeal?

For 90 seats, they would be operating on thin routes..economics would be they key.

:hmm:

ChrisVJ 29th January 2005 06:02

Maybe there are other reasons they are pursuing this just now.

It is easier and cheaper to make Al frames circular, however now we are into Resin and fibre the frames will be made in molds, will cost about the same for either shape.

Building in fibre, internal bulkheads can be molded into the frames to support the pressure inside across the flat area (while a circular fuselage does it naturally.)

Could be used to improve ground clearance or stance ( like flattened engine cowlings?)

May have areodynamic ramifications too, particularly in nose high attitudes?

Evo 29th January 2005 08:01


The patent will prevent Airbus from following Boeing and develop a twin isle 2+3+2 seat 737/A320 category aircraft
One of the requirements under US Patent law is that the inventive step is not obvious. Now, unless there are some weasel words in the depths of the patent (I only read the abstract and summary, and skimmed the rest), the idea of making the cabin a bit wider to allow 2+3+2 rather than 3+3 seems hard to defend as a non-obvious solution to a problem.

Load Toad 29th January 2005 08:40

Should have no aisles - forcing the passengers to crawl over the seats. And reduce leg room further...cut off the legs below the knee. And make the cabin lower.....

speedbird_heavy 29th January 2005 09:41


Should have no aisles - forcing the passengers to crawl over the seats. And reduce leg room further...cut off the legs below the knee. And make the cabin lower.....
Isn't that standard practice with the charter airlines?

Thunderball 2 29th January 2005 11:35

"One of the requirements under US Patent law is that the inventive step is not obvious". (Evo).

Obviously another requirement is that it should be in the national interest.

I bet a pound to a cent that if I'd pitched up with a patent application supported by those fag-packet drawings they would have arrested me, removed my shoes and trouser belt, and called Homeland Security.

Charles Darwin 29th January 2005 11:39

I heard that Boeing is patenting the pigstrap seatbelt. Then the Europians will be out of the US marked for good.:p

Farrell 29th January 2005 14:08

I think Lego brought out a model like this one when I was a kid!

RUDAS 29th January 2005 14:32

that is interesting indeed that they patented it!


All times are GMT. The time now is 18:10.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.