LHR Go-arounds 2 Nov
Thread Starter
Join Date: Aug 2007
Location: Ruislip Middlesex,England
Age: 69
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Many thanks to all for your replies,especially Flying Fred.....your insight as to how the flight crew call it was most informative!. From the ground,we will have a much better understanding and appreciation of what is happening next time we view a go-around. cheers!
Join Date: Jul 2000
Location: My views - Not my employer!
Posts: 1,031
Likes: 0
Received 0 Likes
on
0 Posts
GlenQuagmire... The usual reason for leaving the gear dangling after a normal takeoff is a brake unit locked out. You give it around 2 minutes (precise time depends on type) for the wheel to spin down prior to retracting the gear.
Hope that helps...
Hope that helps...
The usual reason for leaving the gear down after takeoff is because a wheel brake has been deactivated. This is an allowable defect. In a normal gear retraction, the brakes are automatically applied to the main gear wheels so that the wheels have stopped spinning by the time they enter the gear bay. In the case of a deactivated brake, the wheels have to be left down for 2 min after takeoff to allow the wheels to stop spinning.
Join Date: Feb 2006
Location: round an about
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Brake application after T/O ?
Well I've been flying B747s since 1996 and I've never applied brake pressure to stop the wheels rotating after a take off. Never seen it as a written procedure in any Boeing flight manual either ?
Join Date: Feb 2006
Location: U.K.
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
On the 777, if a wheel brake is deactivated by having the brake line capped, the requirement is to leave the gear down for 2 min after takeoff. The reference is 777 DDG item 32-45-01B.