China Eastern 737-800 MU5735 accident March 2022
Join Date: Jul 2009
Location: Geneva, Switzerland
Age: 68
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
(...) On the one hand the Chinese are being uncharacteristically open with their press conferences but may still be guarded in their admissions of the possibility of a mid-air collision with an errant mil-jet. Everything outside of airways in China is mil-controlled. Consequently getting co-ordination for wx avoidance is downright impossible. Equally an errant military jet may have infringed civil airspace resulting in a mid-air (...)
A collision may be unlikely, but suppose that were the case. The Chinese would be reluctant, putting it mildly, to admit this.
Interesting dynamics in multinational investigation team, a bit like the WHO looking into the lab-leak hypothesis.
The future of Boeing is at stake let’s not forget that.
They’ve barely recovered from the Max debacle and a potential fleet wide problem with the -800 series could very well be the end of it.
They’ve barely recovered from the Max debacle and a potential fleet wide problem with the -800 series could very well be the end of it.
The Chinese government and media outlets are reporting that all 132 victims have been 'identified' through DNA testing, cross-matched with samples taken from their relatives. That seems quite a tall order, given the accident only occurred a week ago and the difficulty of recovering remains from the crash site.
http://english.www.gov.cn/news/topne...3353285ed.html
http://english.www.gov.cn/news/topne...3353285ed.html
Last edited by BuzzBox; 29th Mar 2022 at 01:01.
The difference with the MAX is the MCAS problems were detected at the start of the aircraft’s operational service life.
Given the airframe has been around for 24 years it would be very rare if an endemic problem that causes catastrophic uncontrollable states has been lying dormant and undiscovered that whole time.
The difference with the MAX is the MCAS problems were detected at the start of the aircraft’s operational service life.
The difference with the MAX is the MCAS problems were detected at the start of the aircraft’s operational service life.
Manufacturer Serial Number (MSN) 41474
Line Number 5453
Aircraft Type; Boeing 737-89P(WL)
First Flight 5 Jun 2015
Age 6.8 Years
Production Site Renton (RNT)
Line Number 5453
Aircraft Type; Boeing 737-89P(WL)
First Flight 5 Jun 2015
Age 6.8 Years
Production Site Renton (RNT)
Boeing is certainly not in the clear.
The Max is still not re-certified for Commercial operations in China and they may delay even further.
Join Date: Apr 2019
Location: Sweden
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Something the newer 737 ng have in common with 737 MAX
All 737 MAX and most 737 ng manufactured 2014 or later (I'm not sure about date) are equipped with a new model of the motor and motor driver that is used for electric trim.
There could be a difference in how the newer motor and motor driver is able to restore normal trim after a runaway trim. Compared with older motors.
The new trim motor and driver that came around 2014 is from Eaton and is called Model 6355C. Among what is new is:
– Brushless three phase motor
– Dual current limit (torque) control circuits
I have not been able to find any information about when the current limit/torque limit kicks in. The strong force required to recover from e.g. a runaway trim if the mistrim is compensated for by elevator, have been shown that it can be impossible to fix with the cockpit wheels. Even if both pilots try to, manually. Unless a maneuver like the "roller coaster maneuver" is used.
There is not so much information about Eaton Stabilizer Trim Motor 6355C available, but here is some.
Search for:
Eaton Stabilizer Trim Motor 6355C
I'm not allowed to post links.
/ywagd
All 737 MAX and most 737 ng manufactured 2014 or later (I'm not sure about date) are equipped with a new model of the motor and motor driver that is used for electric trim.
There could be a difference in how the newer motor and motor driver is able to restore normal trim after a runaway trim. Compared with older motors.
The new trim motor and driver that came around 2014 is from Eaton and is called Model 6355C. Among what is new is:
– Brushless three phase motor
– Dual current limit (torque) control circuits
I have not been able to find any information about when the current limit/torque limit kicks in. The strong force required to recover from e.g. a runaway trim if the mistrim is compensated for by elevator, have been shown that it can be impossible to fix with the cockpit wheels. Even if both pilots try to, manually. Unless a maneuver like the "roller coaster maneuver" is used.
There is not so much information about Eaton Stabilizer Trim Motor 6355C available, but here is some.
Search for:
Eaton Stabilizer Trim Motor 6355C
I'm not allowed to post links.
/ywagd
That can be everyone's guess. But since the FDR and CVR data are most likely available in a few days, there is no need to speculate. I am sure the reason will come out regardless what face saving by whatever party might be involved. FDR and CVR data can be sent by email so no need for NTSB or Boeing people on site waiting for any Covid clearance.
China has grounded a lot -800 so they have some interest to figure this out.
China has grounded a lot -800 so they have some interest to figure this out.
Join Date: Jan 2008
Location: UK
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
The Chinese government and media outlets are reporting that all 132 victims have been 'identified' through DNA testing, cross-matched with samples taken from their relatives. That seems quite a tall order, given the accident only occurred a week ago and the difficulty of recovering remains from the crash site.
All 132 victims of China's plane crash identified
All 132 victims of China's plane crash identified
Sure, but given the aircraft was pulverised by the high-speed impact, I'm surprised they've been able to find and identify DNA material from ALL of the occupants in such a short space of time.
Join Date: Apr 2019
Location: Sweden
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
My guess is that the hundreds of workers that have been working for days to collect everything, including parts and fragments from the plane, and body parts, soon had collected many thousands of fractions from both the plane and from victims. When 132 different DNA profiles had been found the next step was to identify the individuals. Often through DNA from relatives.
Join Date: Apr 2014
Location: NY
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
I read that headline and am in disbelief.... to isolate 132 individual DNA in that wreckage...especially the souls in the back of the plane who probably ended up far down the hole. I can't fathom how they could do this.
PCR genetic analysis has come down massively in cost and time lately. I find this only mildly surprising.
Join Date: Dec 2018
Location: Florida
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Not to get too morbidly graphic, but do you think the souls in the front of the plane fared better than the ones in the back?
Join Date: Apr 2014
Location: NY
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
The point was those in back of plane would end up far into hole, and harder to access/isolate their DNA, vs those in the front, as the impact would scatter on the surface, this notion further makes me doubt their claim of identifying 132 distinct DNA.
Join Date: Dec 2014
Location: Schiphol
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
In one of the early press conferences they mentioned that all the passengers were Chinese nationals. So there was no need to go into the more lengthy process of asking foreigners to come forward. Based on this you might say that there is a difference in identification time between an all nationals flight and a flight with a mix of (inter-)national passengers.
China makes extensive use of facial recognition, a BBC video showed they could find a reporter in Shanghai or similar within 7 minutes, so they might have used that to take a look at images at the airport to confirm who actually entered the aircraft. On the first day they mentioned one more passenger than thereafter.
Many countries have identification processes in place these days to enable quick identification. The area was hot (30C) and very humid (heavy rain for days), so they had to work fast.
During the weekend the investigation and authorities declared all PoB deceased. From that point on they start making more use of heavy machinery and are building and widening roads to support the recovery effort. The continuous rain has made this a big effort.
Last edited by A0283; 29th Mar 2022 at 22:33.
FWIW: Given how they used to identify people in this scenario prior to DNA, it would definitely seem plausible with todays DNA/computer technology to ID their remains much quicker and probably with better accuracy. The human body doesn't simply vaporize on impact.
Join Date: Apr 2014
Location: NY
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
No, it doesn't vaporize, but it is organic and burns and is consumed. I simply do not believe they identified all 132, and no less before they found the second black box. Maybe I am wrong, and maybe they had a big group focused on just DNA sampling. I saw the images of the fires and the heavy rains, and such and just don't believe the claim.
Last edited by diclemeg; 29th Mar 2022 at 16:34.
Join Date: Apr 2015
Location: Kilsby Warwickshire
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
At 1.08 in to the video, notice the blank panel for the window aperture on the starboard side last row of the window belt. There is some material trapped by the window blank and the fuselage skin. Has this material [possibly part of a seal] failed in the air, not impact damage. See
