Go Back  PPRuNe Forums > Flight Deck Forums > Rumours & News
Reload this Page >

Airline diverts due to cracked window

Wikiposts
Search
Rumours & News Reporting Points that may affect our jobs or lives as professional pilots. Also, items that may be of interest to professional pilots.

Airline diverts due to cracked window

Thread Tools
 
Search this Thread
 
Old 2nd May 2018, 23:38
  #1 (permalink)  
Thread Starter
 
Join Date: Mar 2014
Location: WA STATE
Age: 78
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Airline diverts due to cracked window

https://www.usatoday.com/story/trave...dow/573435002/
Keldy Ortiz and Dave Sheingold, NorthJersey.com Published 12:52 p.m. ET May 2, 2018 Updated 3:54 p.m. ET May 2, 2018

A Southwest Airlines flight bound for Newark Wednesday morning diverted to Cleveland because of a broken window, a passenger said. "On my way to NJ for work and #Southwest957 gets a window crack," said Alejandro Aguina on Twitter. "Only outside crack so we're all safe." The plane carried 73 passengers at the time of the landing, the airline said in a statement. There were no injuries reported.

Southwest in a statement said no emergency landing was requested. The plane was taken out of service "for maintenance review."
CONSO is offline  
Old 3rd May 2018, 00:11
  #2 (permalink)  
 
Join Date: Jan 2011
Location: Seattle
Posts: 716
Likes: 0
Received 3 Likes on 2 Posts
"Only outside crack so we're all safe."
Anyone have a cross section diagram of a 737 window? And which layers withstand pressure differential?
EEngr is offline  
Old 3rd May 2018, 05:37
  #3 (permalink)  
 
Join Date: Feb 2004
Location: Australia
Posts: 1,307
Likes: 0
Received 0 Likes on 0 Posts
Outer pane = non-structural (rigid, hard, scratch resistant surface).
Thin conductive layer (window heat)
Thick vinyl layer (prevents the shatter of a broken window if the inner pane breaks
Inner pane = structural (holds pressurisation loads)
NSEU is offline  
Old 3rd May 2018, 07:41
  #4 (permalink)  
 
Join Date: Nov 2010
Age: 56
Posts: 953
Received 0 Likes on 0 Posts
Originally Posted by NSEU
Outer pane = non-structural (rigid, hard, scratch resistant surface).
Thin conductive layer (window heat)
Thick vinyl layer (prevents the shatter of a broken window if the inner pane breaks
Inner pane = structural (holds pressurisation loads)
this was a pax window
hans brinker is offline  
Old 3rd May 2018, 10:15
  #5 (permalink)  
 
Join Date: Dec 2013
Location: Dallas
Posts: 108
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by NSEU
Outer pane = non-structural (rigid, hard, scratch resistant surface).
Thin conductive layer (window heat)
Thick vinyl layer (prevents the shatter of a broken window if the inner pane breaks
Inner pane = structural (holds pressurisation loads)
​​​​​​
.

A Southwest Airlines flight bound for Newark Wednesday morning diverted to Cleveland because of a broken window, a passenger said. "On my way to NJ for work and #Southwest957 gets a window crack," said Alejandro Aguina on Twitter. "Only outside crack so we're all safe."


NSEU, thanks for providing that description. News reports indicate the aircraft remained pressurized despite the cracked outer pane. The subsequent descent and landing was completed without further incident. I hope an engineer forum member will provide details of the materials used for the outer pane and experiences with similar failures and their causes. I imagine UV exposure and pressurization cycles weaken the material.
.

Passenger Mr. Aquina deserves credit for his dispassionate description of the event. Cell phone video taken inside the aircraft revealed several passengers were quite terrified by what was essentially a non-event.
ThreeThreeMike is offline  
Old 3rd May 2018, 12:23
  #6 (permalink)  
 
Join Date: Jan 2018
Location: Mexico
Posts: 80
Likes: 0
Received 0 Likes on 0 Posts
Outer pane - holds the pressure difference
Inner pane - should hold the pressure difference if the outer pane fails
Scratch panel - purely decorative to protect the inner pane from bored passengers.
Highway1 is offline  
Old 3rd May 2018, 12:50
  #7 (permalink)  
 
Join Date: Jan 2008
Location: Reading, UK
Posts: 15,822
Received 206 Likes on 94 Posts
Originally Posted by ThreeThreeMike
​​​​​​NSEU, thanks for providing that description.
Yes, it will come in handy when we next have a thread on flight deck transparencies.

Originally Posted by Highway1
Outer pane - holds the pressure difference
Inner pane - should hold the pressure difference if the outer pane fails
Scratch panel - purely decorative to protect the inner pane from bored passengers.
Not forgetting that little hole drilled in the inner pane ...
DaveReidUK is offline  
Old 3rd May 2018, 13:55
  #8 (permalink)  
Thread Starter
 
Join Date: Mar 2014
Location: WA STATE
Age: 78
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
But when the pilots window fails due to improper assembly . . . it takes a miracle -

True story- and an excellent re-creation follows

https://en.wikipedia.org/wiki/Britis...ys_Flight_5390


re-creation follows


CONSO is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.