I'll take a rough guess at £750??? Probably to little an amount I imagine...

Tony
If you need one, it might be trying MW Helicopters at Stapleford before paying Eurocopter price.

Tony, try a good car scrappers first, and look at old Renaults/Citroens........very pragmatic, ...

sycamore i think you are right lol. Go to a helicopter parts company and pay over the odds or go to the local scrappies and salvage a renault. Took a gazelle exhaust pipe to a renault dealer in france to be welded cost next to nothing to get done.

Wonder what happens if you buy a Fly Manual from a 3rd party, do they send you all the amendments??
At 700 quid they should. but I bet there will be an extra charge for that.

The price sounds about right compared to our quote in Australia and Singapore. I think you will find this includes a five year ammendment service, which begins to soften the blow.

Our operation has a manual for each pilot, kindly supplied by Eurocopter. They were generous and provided them as part of the contract. But at the end of the five years it might be difficult to convince the pilots to spend another, say 750 euro on the amendment service.

You can see the position of the manufacturers in this. They nickel and dime themselves on the sale price in the hope that they can make the profit in their service contracts and after sales.

Expensive but worth it is the answer. I have heard of photocopies of the EC120 flight manual going around, but shuuurley helicopter pilots as an honourable breed of mankind would not risk a problem with copyright and even consider such a dastardly deed?

Helicam does not allow PMs nor Email. So I guess I will mention I have one for much less, however I dont know anyone named helicam so I guess I will keep it........
He must just want to moan on the forum...See if that gets me an email.......

The point of the matter being that £700.00 is too much money period, unless you are an aircraft owner.

And yes im just being a old man grumpy

Wait til you deal with the Japanese...
 

My BK117 came with Japanese manuals (Maintenance et al), but could we swap for English, prease? No worries, only $A17,000 :eek: :yuk:

Upgrade to 117-B2, new Flight Manual needed, IIRC about $A4000. Apart from some expansions of performance graphs, the only difference to the -B1 manual were the page titles.

I quite like Mr Bell and his prices, especially as the MM's are free, all we have to pay for is the freight cost :ok:

What was that about copying? Honeywell now have a policy of retaining copyright on the LTS-101 manuals, so I have to pay them an annual fee of $US500 to use their manuals to maintain my bl**dy engines :sad:

If it is for personal study, just borrow it for a morning and drop it into Staples..
Photocopies are pretty cheap these days.

I wonder would Mr.Lappos do a cash deal? :O

EC published the whole FM, Trainings Manual and Operation Manual Stuff regularly on a CD with an own starting program, some videos and background info's. Really nice! The disk is much cheaper than the "paperwork".

Who reads them ? I normally find the in the boot. The FM stowage area is usually full of Mars bars, sick bags and at least afew pens to keep me going for a week:hmm:

Take a looky see here guys,
http://search.ebay.com/helicopters_W0QQfromZR8QQfrtsZ50QQfsooZ1QQfsopZ1
All sorts of manuals turn up on ebay,
it may be of help, maybe not, but its sometimes worth checking out.
All the Best,
Micky

servicing the hyd pack
 

anyone know if the oil drains out when I pull the filter

Fitting the Floats
 

A question on fitting the floats for those of you who have done this.

There is a strap kit to hold the floats in their up position when the wheels are fitted for ground handling. Has anyone tried opening out the hole in the fuselage eyelet so that the pip-pin that locates the floats onto the skids will fit in the eyelet? It looks like about a mm will do, then you can support the floats on the pin when they are in the up position.

This should save the complication and cost of the strap kit.

Many thanks for any extra advice on the floats is also appreciated. (Apart from don't get in a situation where you have to use them...)

looking for help with my job description
 

with a new ship,Human resources asked what the ec120 is like compared to a 206 or a 500.I need to describe what the ship is like technically etc with the vemd being advanced technology, etc,so I thought I postb it here to get anyones opinion...

lamanated,

ec120 cruises faster than any 206, has no center column to block rear pax view, is about a 35 year more modern aircraft, has a cavern as a luggage space (compared to the 206, 500 doesn't have any at all) 120 will outperform a 206 everywhere up to about 4500 ft, then it gets tight, 5500 and the multistage compressor of the Allison Turbine (ups....RR!) takes the lead again.
If your job is not cargo or police or anything very specific forget the 500! MD is also in financial trouble (or did Sikorsky already assimilate Hughes/MD ?)
If your main job is VIP/corporate/tourism take the 120 hands down.
Even if EC is sometimes a little peculiar with their service you hardly ever will need them. Generally the bird is a very trouble free machine! VEMD is nice as you don't have to watch 3 different gauges will really helps when flying in close quarters or at the redline. Overlimit indications have a huge tolerance ( warning comes way before anything registers on the VEMD flightreport system). This feature is also VERY nice if you are not the only pilot! A quick look in the flight log before you take the machine out will confirm if anyone went over any limits lately!

Make sure the helicopter is well track+balanced and rotor rpm at the upper limit at max cruise and you will be happy! (There was a recent service letter to adjust the Rotor rpm to coincide with the resonance dampers under the floor. Best results are as mentioned above, max cruise power - rrpm 412-413)

3top:cool:

We have had 500's for 20 yrs,and I need to tell the company why this aircraft should qualify me as a different pay scale etc whereas it is as complex as what a technician making 15K more than me working on air conditioners and heaters gets here..

Psssst!
 

Anybody heard anything about an EC120 upgrade with a more power, higher transmission hp & a weight increase?