Helideck aiming (TD/PM) circles
I see CHC have modified their line training when it comes to how to land on helidecks...:ugh:
http://i202.photobucket.com/albums/a...g%20circle.jpg As a reminder: Touchdown/Positioning Marking Circle. Described as the Aiming Circle in earlier editions of CAP 437, the TD/PM Circle is the aiming point for a normal touchdown (landing) so located that when the pilot’s seat is over the marking, the whole of the undercarriage will be within the landing area and all parts of the helicopter will be clear of any obstacles by a safe margin. Note: It should be noted that only correct positioning over the TD/PM Circle will ensure proper clearance with respect to physical obstacles and provision of ground effect and provision of adequate passenger access/egress |
Exactly what I thought when I saw the photograph.
Must have been an ex-EC225 pilot :E |
Not that I'm anywhere near the greatest at landing on a deck but I fail to see how one photo taken in time constitutes a normal practice of the entire CHC compliment of pilots. Really I think the purpose of your post was simple to stir the pot. I feel confident saying that you are indeed the best pilot out there and have never landed in outside the circle. Bravo, and kudos to you sir! :ok:
|
9 inches? No knowledge of what you guys require, but it seems none of the items in the Note have been transgressed, and he/she is certainly clear of obstacles. Perhaps the following discussion is taking place in the cockpit. Captain to copilot, who has just flown his/her first approach in a 92 to an offshore platform, "Son/Lass, you need to land further forward in the circle, else 212man is going to chew your ass". |
212man,
Tut, tut ....... to ensure clearance from obstacles but durrrrr - his/her tail is in the obstacle FREE sector!!! |
....so located that when the pilot’s seat is over the marking.... 9 inches? No knowledge of what you guys require, but it seems none of the items in the Note have been transgressed, Not that I'm anywhere near the greatest at landing on a deck but I fail to see how one photo taken in time constitutes a normal practice of the entire CHC compliment of pilots. Really I think the purpose of your post was simple to stir the pot. I feel confident saying that you are indeed the best pilot out there and have never landed in outside the circle. Bravo, and kudos to you sir! |
"Son/Lass, you need to land further forward in the circle, else 212man is going to chew your ass". |
212man,
Sorry but these are remarks from a retired or office-bound pilot ...... if the crane was there he would have hit it on approach BEFORE landing ....... the CAP437 notes are for ensuring clearance if manoeuvring on the helideck. I bet at night this pilot would have landed out of wind / at right angles to the chevron to ensure his tail clearance, and allow passengers direct egress to the exit where the cameraman is stood ....... and if the wind was too strong would have used his initiative to employ your technique if required |
You may have your SOP 212man and have your standards/aviation adviser hat on, but I think given the deck layout you are being a tad anal on this particular occasion, with all due respect. Absolutely nothing unsafe in the aircrafts positioning on this particular occasion, the only obstructions I can see is the superstructure inboard, and I wouldn't be landing with my tail pointing in that direction in any event.
|
if the crane was there he would have hit it on approach BEFORE landing ....... the CAP437 notes are for ensuring clearance if manoeuvring on the helideck. You may have your SOP 212man your technique Sorry but these are remarks from a retired or office-bound pilot |
so located that when the pilot’s seat is over the marking, the whole of the undercarriage will be within the landing area and all parts of the helicopter will be clear of any obstacles by a safe margin. Think the guy/gal achieved all that, U/C is within the landing area. :E Poor wording of the quote, or the definition of "landing area", a bush lawyer could have a field day. ;) Imagine the result if the U/C wasn't within the landing area, as per the definition of same. |
Time to use HFDM to monitor accuracy of deck positioning or perhaps get the HLOs to score each landing like they do on aircraft carriers.
|
Surprised at some of the responses here.
ICAO Annex 14 - Volume 2 5.2.9.1 A touchdown/positioning marking shall be provided where it is necessary for a helicopter to touch down or be accurately placed in a specific position. 5.2.9.2 A touchdown/positioning marking shall be located so that when the pilot’s seat is over the marking, the undercarriage will be inside the load-bearing area, and all parts of the helicopter will be clear of any obstacle by a safe margin. The only time that the safety of the helicopter can be guaranteed is when the pilot is positioned correctly on the TD/PM. For those who wish to make their own assessment of obstacle clearance, read the Brent Spar accident report (G-BEWL) & the human factor issues therein |
And there lies a problem of HFDM ...... mobile vessels / rigs are not fixed landing runways - the deck heading is not known by the system at the time!!? Shelly you know that?!
|
I also know Mariner B is a fixed installation.;)
But in the case of floaters the HLO could just hit a button (1 to 10 or red, amber or green) to grade the landing and that could be set up to send an e-mail to the Chief Pilot, OIM/Master and of course the company aviation advisor.:) Such real time compliance monitoring would certainly improve standards.:ok: |
Put yer ass over the yellow line ..
Most short landings occur because pilots focus on the H instead of the opposite (upwind) edge of the helideck. Just my humble opinion. |
I also know Mariner B is a fixed installation |
212man: you'd be amazed to see how many line training captains and senior captains have absolutely no clue about this - in my experience though, and in fairness, those were mostly GOM pilots. One LTC told me with a dead serious face that I should trust him, because he had been involved in helideck certification and CAP437 supported his view - bit of Kafka moment there really. You'd be more forgiving with those who have never heard about CAP437, than those who pretend to know the content and yet have absolutely no idea of what it recommends.
|
We are once again in danger of being a trifle EURO/US - centric in our views. Anyone who has lived offshore with their machine for any length of time will tell you that the key thing about deck markings is to understand why they are there and how to use them when you need to know how much room you have to play with when manoeuvring on the deck.
I have observed that there are many who operate safely without the slightest idea what that yellow/white aiming circle means. Sad but true because that lack of knowledge may one day cost you dear. When operating a machine on a minimum sized deck for that size of helicopter the pilot can only be sure he can move the tail into the 150 deg. obstacle sector safely if his bum is kept over the aiming circle whilst keeping the centreline of the helicopter through the centre of the circle. Why would he want to do that? If you have to ask that question you have lived a sheltered life or not been in the business long enough. ;-) Outside Europe/US there are parts of the world where they have no idea what you are talking about when you ask them how to use the deck markings correctly. Having said all that those that operate to/from decks built for larger types are not really involved in the same debate but it still helps to know why the circle is there and how to use it when you need to. G. |
Outside Europe/US there are parts of the world where they have no idea what you are talking about when you ask them how to use the deck markings correctly. |
All times are GMT. The time now is 16:22. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.