EC135T2+ or P2+ or T3 FM extracts on performance and limitations?
Greetings
Like to run the performance numbers on capabilities of the newer models to operate in a continual ISA+20 environment from SL up to 8000' PA. Max payload, range, endurance, IGE/OGE hover.... Appreciate if some interested folks can pm me and send soft copy of Flight manual extracts. I have an excel template that can send out to be filled in also. Checking to see feasibility to getting one working here. |
AHD added a fifth blade together with some major design changes on the tailboom:
Helionline.de http://www.helionline.net/865-620732.../41688/big.jpg skadi |
Maybe the new fenestron, main rotor and blades of the X4 project ?
|
Maybe the new fenestron, main rotor and blades of the X4 project ? skadi |
I didn't know about the X9 program but the EC135 s/n 001 seems to have been the testbed of a lot of things from Eurocopter so...
|
Heres a listing of the different programms of AH:
http://www.pprune.org/rotorheads/507...ml#post7688603 skadi |
After 2 shocks today, have they finally got rid of the collective / metal watch strap phenomenon?
|
Sweaty hands eh?... Keep your hand on the collective twist grips and you want get zapped. I think is designed to switch the transponder to GND and VEMD flight time recording, although not sure on the later.
|
Sweaty hands eh?... Keep your hand on the collective twist grips and you want get zapped. Apart from missing the bit of my post that says "collective / metal watch strap", its a bit hard operating the radio selection box, which is when the shock occurs, without taking a hand off the twist grips! ;) |
Why you get a shock?
A relay is an electro-mechanical switch that opens and closes under the control of another electric circuit. When current flows through the coil of the relay, a magetic field is created that causes an armature to move, either making or breaking an electrical connection. When current is removed from the relay coil, the armature returns to its rest position. It is important to place a diode across the coil of the relay because a spike of voltage is generated when the current is removed from the coil due to the collapse of the magnetic field. As the field within the relay collapses (through your arm) you get a taste of the spike. Ouch! I have personal experience and it definitely bites. 32-60-03 Ground Relay PP20E -> CB 1CX GROUND REL -> Relay 2CX -> 8VE COLLECTIVE PIL It controls various things through TB27 A,T,J and V respectively. Maybe 2p worth of diode may fix it! Needles to say that the radios may endure the spike as well? |
CVR/FDR Lite
EC135-31-070 DISPLAY AND RECORDING SYSTEMS – Vision 1000 - Retrofit of a Vision 1000 cockpit camera
Description The Vision 1000 is a cockpit imaging and flight data monitoring device and is installed on the center post. The system captures critical inertial and GPS positioning data as well as cockpit imagery and ambient noises. The flight data, imagery and noises are stored on a crash-hardened memory module as well as on a removable SD HC card for use in the management and visualization program. Benefits for the customer Increased operational safety - Can be used to replay the flight scenarios during training Recording of positioning data (location, altitude, etc.) Recording of cockpit imagery (instrument panel, flight controls, partial exterior view) and ambient noises Analysis of recorded data with the management and visualization software (included) Additional 3D software available at Appareo Systems (not included) Technical features Weight: approx. + 0.8 kg Image resolution: 2 megapixels Image frame rate: 4 frames per second Audio frequency range: 50 Hz - 15 kHz Removable Flash Memory - SDHC card, storage capacity: 16 GB, Storage time: 4 hours image/audio/GPS/inertial On-Board Flash Memory - storage capacity: 8 GB, Storage time: 2 hours image/audio/GPS/inertial Vision 1000 camera EUR 7500.00 Retrofit of the reading light EUR 150.00 Name plates CB I, CB II, SW III EUR 750.00 Standard parts EUR 50.00 Labour - Electric - ~ 30 Hours Mechanical ~ 25 Hours Looks to be a fairly effective solution considering the options available. |
Thanks RVDT, although I think it has been covered previously in this thread. I was just asking if the new design might have a different grounding system, removing the chance of this little shock.
Mind you sometimes it comes in handy after going round and round and round and round and round and round and round and round and :ooh: |
Airbus Modifies EC135 as Environmental Tech Testbed
A German photographer spotted a modified EC135 at Airbus Helicopters’ development facility in Donauwörth, Germany. Most striking is the light twin’s new horizontal empennage, moved to the top of the vertical fin. The bottom of the vertical empennage also has a different design and the tailboom now appears to have a circular cross-section. In addition, the helicopter sports five main rotor blades–instead of four on the stock EC135–with swept tips. The landing skids also have been redesigned. Asked whether the helicopter is the prototype of a new EC135 variant, Airbus Helicopters answered that it is “testing environmentally friendly technologies on a demonstrator aircraft.” While the EC135 is being used as a testbed, Airbus said the technologies should be seen as “transversal,” meaning not specifically intended for any one particular helicopter model. Meanwhile, the manufacturer is gearing up for the first delivery of the latest EC135 version, the EC135 T3/P3, which was previously delayed to the fourth quarter. Announced at Heli-Expo 2013, the new model offers several improvements over the current EC135 T2i/P2i, yielding a 66-pound mtow increase and improved hot/high performance. http://www.helionline.net/517-967277...ture/41688.jpg |
I'm guessing some X4 linked technologies...
|
Can anyone shed any light on a co-pilot reversible seat for the 135?
I see it listed in the IPC, Chapter 25, as 'against FD' (Flight direction I am guessing) and the picture showing it facing backwards, but I have had no luck finding any other ref to it? TCF |
Yes, usually it's a part of HEMS (single-pilot) configuration, or in hoist operation configurations (HHO)...with hoist on left side.
JR |
Is it just me, or does that machine appear to have 5 MRBs ?
|
Originally Posted by tqmatch
(Post 8719723)
Is it just me, or does that machine appear to have 5 MRBs ?
Originally Posted by John Eacott
The bottom of the vertical empennage also has a different design and the tailboom now appears to have a circular cross-section. In addition, the helicopter sports five main rotor blades–instead of four on the stock EC135–with swept tips. The landing skids also have been redesigned.
|
T3/P3 EASA Certification
|
First delivery of T3 to Aiut Alpine
The T3 first customer lol
Aiut Alpin Dolomites receives first EC135 T3/P3 | Helihub - the Helicopter Industry Data Source Cheers |
All times are GMT. The time now is 21:09. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.