Lubricating oil 10W30 C-013 (J 2362 or MIL-L-46152[OLD])
Thread Starter
Lubricating oil 10W30 C-013 (J 2362 or MIL-L-46152[OLD])
Hey All,
On my Bell 206A I have an older/optional main rotor head with the pillow block reservoirs. It specs 10W30 C-013 in the consumables list. Both Specs J2362 and the older Mil-L-46152 come up easily in a search, but I am wondering what lubricant oil you guys would use. I'd like to have some on hand as they are prone to some seepage sometimes.
Thanks!
Rick
On my Bell 206A I have an older/optional main rotor head with the pillow block reservoirs. It specs 10W30 C-013 in the consumables list. Both Specs J2362 and the older Mil-L-46152 come up easily in a search, but I am wondering what lubricant oil you guys would use. I'd like to have some on hand as they are prone to some seepage sometimes.
Thanks!
Rick
Hey All,
On my Bell 206A I have an older/optional main rotor head with the pillow block reservoirs. It specs 10W30 C-013 in the consumables list. Both Specs J2362 and the older Mil-L-46152 come up easily in a search, but I am wondering what lubricant oil you guys would use. I'd like to have some on hand as they are prone to some seepage sometimes.
Thanks!
Rick
On my Bell 206A I have an older/optional main rotor head with the pillow block reservoirs. It specs 10W30 C-013 in the consumables list. Both Specs J2362 and the older Mil-L-46152 come up easily in a search, but I am wondering what lubricant oil you guys would use. I'd like to have some on hand as they are prone to some seepage sometimes.
Thanks!
Rick
I believe we had used a type of air compressor oil that met Mil-L-46152 requirements, but I haven't seen an oiled hub in the wild since the early 80s, so don't have any current brands to offer. Regardless, I have to agree that converting it to a grease hub at the next OH would be in your best interests based on my experience.
Hey All,
On my Bell 206A I have an older/optional main rotor head with the pillow block reservoirs. It specs 10W30 C-013 in the consumables list. Both Specs J2362 and the older Mil-L-46152 come up easily in a search, but I am wondering what lubricant oil you guys would use. I'd like to have some on hand as they are prone to some seepage sometimes.
Thanks!
Rick
On my Bell 206A I have an older/optional main rotor head with the pillow block reservoirs. It specs 10W30 C-013 in the consumables list. Both Specs J2362 and the older Mil-L-46152 come up easily in a search, but I am wondering what lubricant oil you guys would use. I'd like to have some on hand as they are prone to some seepage sometimes.
Thanks!
Rick
The specs seem to refer to a standard automotive piston engine oil.
That might sound unusual but manufacturers used to specify commercial rather than aviation oils for some applications.
An example being the Hughes 300. The gearbox oil was a commercial EP90 and the engine driveshaft grease was Shell Alvania
which was used to grease the turntables on articulated trucks.
I would say that any oil that meets the spec purchased locally will do. I would agree with the above that converting to grease would be a benefit.