A109SP AP P FAIL
Thread Starter
Join Date: Jan 2009
Location: europe
Age: 41
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
A109SP AP P FAIL
Hi
maybe any of you know system better , if 1 AP P FAIL shortly after TO maybe be caused by battery condition not very well ? why am I asking ,
because every time when we connect GPU before flight in BATT charge mode for about an hour , message didn't pop up after takeoff , but if we not recharge BATT before flight than almost every time it will pop-up after takeoff . For me that make no sense because when engines are running power supply is good enough from generators but this is fact and was tested several times that's why I'm looking any relation between battery condition and auto flight system
Regards
maybe any of you know system better , if 1 AP P FAIL shortly after TO maybe be caused by battery condition not very well ? why am I asking ,
because every time when we connect GPU before flight in BATT charge mode for about an hour , message didn't pop up after takeoff , but if we not recharge BATT before flight than almost every time it will pop-up after takeoff . For me that make no sense because when engines are running power supply is good enough from generators but this is fact and was tested several times that's why I'm looking any relation between battery condition and auto flight system
Regards
Join Date: Feb 2005
Location: On the green bit near the blue wobbly stuff
Posts: 674
Likes: 0
Received 1 Like
on
1 Post
That is a strange one - maybe if you could check the generator loads just before take-off in the 2 different situations, and see if there is a significant difference? It may be ( like you seem to be thinking) that if there is a very high generator load whilst charging the battery, then the AP is sensitive to any very small voltage drop.
