MD600N trim
Thread Starter
Join Date: Mar 2021
Location: france
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
MD600N trim
Hi , I cannot trim up on my MD600N , dual controls trim switches work perfectly lateral R/L and longitudinal Up , but when pressing down the breaker is popping out , is anybody experienced the same and can give me the findings ,
Thank you
Manuel
Thank you
Manuel
Thread Starter
Join Date: Mar 2021
Location: france
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
MD600 trim
it works perfectly on lateral mode R/L ,and UP , I presume there are two electrical motors one for lateral mode and one for longitudinal mode ,so in my case Longitudinal works on down but breaker pops up when trimming up , problem on both sticks
Join Date: May 2001
Location: Escrick York england
Posts: 1,676
Likes: 0
Received 0 Likes
on
0 Posts
you could ask your engineer to swop them over to test I think they are the same but check with your engineer