S76A++ end of the road????
Avoid imitations
Join Date: Nov 2000
Location: Wandering the FIR and cyberspace often at highly unsociable times
Posts: 14,573
Received 422 Likes
on
222 Posts
Isn't this the only example with a single cabin door? I know who looked after this one; it's been very well maintained.
Is that the Brecqhou machine?
Join Date: Mar 2019
Location: Guernsey
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Steve Hogarth and I purchased this aircraft from Japan in 1998 for Brecqhou. She was brought into line with UK CAA requirements by Bristows Redhill (for which thank you Chaz Newport) and has been a stunningly good machine for that operation ever since. Be a hard act to follow. Sad day today. Thank you DF, you've been a goody! Mark Harrisson, Guernsey.
Simply put it had the engines and gearbox from a C in an A airframe and was torque limited to prevent bending the airframe. Unique torque gauges with power limited at 86.6 % (IIRC) rathe than 100% and the flight manual had the graphs from a C cut off at 10,800lbs rather than 11,700 lbs.
Used to be jokingly called the "C minus"
A great machine for that particular mission.
Join Date: Mar 2019
Location: Guernsey
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Yes, that is all correct and then we had the latest dash number Quiet MGB fitted and put a lot of effort into weight reduction and fore and aft C of G to ensure she flew nice and smooth and fast and to keep her really smooth changed control rod end bearings as soon as they started showing any play. Made a big difference. In the end she landed up with C++ gear boxes and could have accepted the S76D blades. That really would have made her very smooth, reduced the cruise fuel burn and improved the vertical performance. Never got to that bit, which remains a regret. It is an aircraft I have a lot of time for as it is so well tuned to its task and whether you are sitting in the front or back, a pleasure to fly in.
Thanks, although all A+/A++ are ‘modified’ surely - all began life as As. The C MGB rings a bell now, after 19 years - I recall dash 9600 versus dash 9500 (demonstrating my sad ability to remember numbers but not people’s names!) Coincidentally I was there doing a differences course on our first A++ before ferrying it to Lagos.
Avoid imitations
Join Date: Nov 2000
Location: Wandering the FIR and cyberspace often at highly unsociable times
Posts: 14,573
Received 422 Likes
on
222 Posts
Where I worked, the C was known as the B minus.
Minus the power....
Minus the power....
Join Date: Mar 2019
Location: Guernsey
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I think I am correct in saying that the last twelve S76A airframes actually conformed to the S76C airframe standard. 2-BYDF was in that batch. We searched everywhere for just the right airframe for that job. The Starboard Pax door was sealed into place so from the outside she appeared not to have he door (the escape panel window was fitted). For ground handling of VVIP pax this single port door configuration was helpful. When we got her she was an S76A+ only and cleared to 10,500 lb only. BHL did the upgrade to A++ changing a section of skin on either side just by the engine bays and the engines went back to Turbomeca for their upgrade. All came together and we put the light weight dog house on her ( nightmare to fit but worth it) It was a very interesting mod programme. I think we embodied a total of 96 BHL mods (some just a bolt change or addition, others more serious) . She had just 74 hours total when starting to operate for us
Join Date: Oct 2009
Location: West Sussex
Age: 84
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Mark. It was fun, we finished the air test by flying round the Emperors Palace.
That evening we went to downtown Yokohama for a chinese meal as my Japanese guide did not like Japanese food. I made a pratt of myself by trying to eat meatballs in soup, with chopsticks.
We went back to Tokyo in a night tourist flight AS355, operated by the same company ,Tokyo by night from a Helicopter is a wonder to behold.
That evening we went to downtown Yokohama for a chinese meal as my Japanese guide did not like Japanese food. I made a pratt of myself by trying to eat meatballs in soup, with chopsticks.
We went back to Tokyo in a night tourist flight AS355, operated by the same company ,Tokyo by night from a Helicopter is a wonder to behold.
Yes, that is all correct and then we had the latest dash number Quiet MGB fitted and put a lot of effort into weight reduction and fore and aft C of G to ensure she flew nice and smooth and fast and to keep her really smooth changed control rod end bearings as soon as they started showing any play. Made a big difference. In the end she landed up with C++ gear boxes and could have accepted the S76D blades. That really would have made her very smooth, reduced the cruise fuel burn and improved the vertical performance. Never got to that bit, which remains a regret. It is an aircraft I have a lot of time for as it is so well tuned to its task and whether you are sitting in the front or back, a pleasure to fly in.