Jammed Controls - Instances?
I don't want to hijack this thread, however, this can not go unchallenged. As an AS350 instructor since 1995, having performed literally countless AS350 aircraft and simulator stuck pedals, I find your statement inconceivable. But certainly, don't take my word for it:
Simulated Failure Procedure FFS AS350 B3/H125 - Tail Rotor Control Failure
Stuck Pedal Landing Procedures
Stuck Pedal
Stuck Pedal Run on in AS-350
N1883H Aerospatiale AS350 Stuck Pedal Practice
AS350 Stuck Pedal Landing
etc...
Note: the official Airbus Helicopter’s video (first one) demonstrates a condition where the linkage between the pedals and T/R has been severed. The pedals are free to move, however, the T/R is in a “fixed pitch” position.
LAX07IA115
Simulated Failure Procedure FFS AS350 B3/H125 - Tail Rotor Control Failure
Stuck Pedal Landing Procedures
Stuck Pedal
Stuck Pedal Run on in AS-350
N1883H Aerospatiale AS350 Stuck Pedal Practice
AS350 Stuck Pedal Landing
etc...
Note: the official Airbus Helicopter’s video (first one) demonstrates a condition where the linkage between the pedals and T/R has been severed. The pedals are free to move, however, the T/R is in a “fixed pitch” position.
LAX07IA115
On the other hand, JimEli, all the five videos that you pulled out demonstrate the stuck right pedal procedure (what the manual calls "control failure", the TR being stuck a high angle of attack). What Gordy described was a stuck left pedal scenario (what the manual calls "TR Drive failure")! In the context if this educational thread started my Mick Cullen, Gordy admits that at the time he misdiagnosed the type of TR failure he was having and applied the "stuck right pedal" procedure. We are grateful to Gordy for his vivid account of his stuck TR experience! I just brings home how important it is to figure out if you have too much, or too little anti-torque before deciding on your course of action.
One can agree with Gordy that the manual is useless: OK, everything the manual says is correct but one has to know prior what is correct, and then read the text several times to understand what they indeed mean. Anyway, who has time during an emergency to study the manual...
On the other hand, JimEli, all the five videos that you pulled out demonstrate the stuck right pedal procedure (what the manual calls "control failure", the TR being stuck a high angle of attack). What Gordy described was a stuck left pedal scenario (what the manual calls "TR Drive failure")! In the context if this educational thread started my Mick Cullen, Gordy admits that at the time he misdiagnosed the type of TR failure he was having and applied the "stuck right pedal" procedure. We are grateful to Gordy for his vivid account of his stuck TR experience! I just brings home how important it is to figure out if you have too much, or too little anti-torque before deciding on your course of action.
On the other hand, JimEli, all the five videos that you pulled out demonstrate the stuck right pedal procedure (what the manual calls "control failure", the TR being stuck a high angle of attack). What Gordy described was a stuck left pedal scenario (what the manual calls "TR Drive failure")! In the context if this educational thread started my Mick Cullen, Gordy admits that at the time he misdiagnosed the type of TR failure he was having and applied the "stuck right pedal" procedure. We are grateful to Gordy for his vivid account of his stuck TR experience! I just brings home how important it is to figure out if you have too much, or too little anti-torque before deciding on your course of action.
First you ask, “who has time during an emergency to study the manual…”
Gordy himself said as much,
“I elected to fly back to the nearest airport with crash rescue facilities----not pessimistic, just stacking the odds in my favor, plus it gave me 30 minutes of transit time to figure it out in my head.”
And later,
“I had enough fuel for about an hour, so I was in no rush.”
Second, the manual has a procedure for “Tail Rotor Control Failure”. The procedure is sometimes referred to as a “stuck pedal”, and applicable to situations regardless of the pitch of the tail rotor (full left to full right). It is applicable to situations under which the pedals are “jammed” or “stuck” and also when linkage between the pedals and the tail rotor has been severed. I suggest closely watching the second video which points out the distinction.
Tail Rotor Drive Failure covers a completely different situation. If you pilot an AS-350 helicopter and don’t understand the distinction between the above malfunctions and their emergency procedures, I suggest seeking additional instruction on the matter.
Also note, there is another RFM procedure entitled, “Flight Control Hardover or Servojam”. This can manifest itself in the pedals as either, uncommanded movement or higher than normal force to move the pedals. However, it is related to a specific type of hydraulic malfunction.
Last edited by JimEli; 22nd Jun 2020 at 16:33. Reason: added clarification