Ec135t2 sas mode - flight characteristics
Thread Starter

Joined: Dec 2006
Posts: 1,303
Likes: 23
From: UK and MALTA
Ec135t2 sas mode - flight characteristics
Hi everyone,
I am interested in the flight characteristics of the EC135T2 when it is fitted only with SAS Mode. Does anyone have any flight experience of how stable the aircraft is in this mode. I understand the technical differences between ATT and SAS so I am not looking for a technical explanation.
I am specifically interested in the potential for an EC135T2 being flown on longish sea treks from islands to islands with SAS Mode engaged. Is it demanding/high work load?
How long can hands and feet be off the controls before the attitude departs dramatically.
The safety of such a proposition.
It would have a RADALT fitted.
Thanking all EC135 Pilots out there for the advice and guidance in this respect.
DB
I am interested in the flight characteristics of the EC135T2 when it is fitted only with SAS Mode. Does anyone have any flight experience of how stable the aircraft is in this mode. I understand the technical differences between ATT and SAS so I am not looking for a technical explanation.
I am specifically interested in the potential for an EC135T2 being flown on longish sea treks from islands to islands with SAS Mode engaged. Is it demanding/high work load?
How long can hands and feet be off the controls before the attitude departs dramatically.
The safety of such a proposition.
It would have a RADALT fitted.
Thanking all EC135 Pilots out there for the advice and guidance in this respect.
DB
Last edited by DOUBLE BOGEY; 26th January 2017 at 16:34.

Joined: Apr 2000
Aviation Qualifications: ATP+Mil
Posts: 10,959
Likes: 1,814
From: EGDC
The rad alt will need audio/visual warning since you won't have a rad-alt hold with just SAS.
I would suggest that if the workload is that high over the water (day or night?) then a 4 axis AP would be preferable.
Is it searching or perhaps survey work?
I would suggest that if the workload is that high over the water (day or night?) then a 4 axis AP would be preferable.
Is it searching or perhaps survey work?

Joined: Feb 2009
Posts: 898
Likes: 0
From: Do I come here often?

Joined: Apr 2000
Aviation Qualifications: ATP+Mil
Posts: 10,959
Likes: 1,814
From: EGDC
DB - only in the sim a couple of times.
If the baralt hold is 'tight' enough it might be good enough for over water work hands off but a rad alt low height warning of some kind is essential for over water work in poor conditions or at night.
If the baralt hold is 'tight' enough it might be good enough for over water work hands off but a rad alt low height warning of some kind is essential for over water work in poor conditions or at night.
Thread Starter

Joined: Dec 2006
Posts: 1,303
Likes: 23
From: UK and MALTA
Hi CRAB an dFNW thanks for your input. However I really want to hear from pilots who have flown the 135 in SAS mode. Anybody out there with this experience I would really like to hear their opinions.

Joined: Feb 2006
Posts: 927
Likes: 12
From: Germany
Hi DOUBLE BOGEY,
only 135 experience in the sim, but real time on Bo105 (without SAS or ATT), BK 117 with SAS and ATT and EC155
The Bo 105 could be actually flown with weight shifting, if it was propperly trimmed out.
With SAS you will have the possibility to trim the bird - and if not disturbed, it will fly nicely straight and level - to give you the time to switch radios, punch in the GPS-waypoints and so on.
Evenso over water 3 or 4 AXIS AP is nicer to have, the workload won´t be excessive on a normal day.
Things will be different, if fog comes into the game or i.e. on the North See one of these grey days, where there is no horizon, the water having the same grey the sky has....
only 135 experience in the sim, but real time on Bo105 (without SAS or ATT), BK 117 with SAS and ATT and EC155
The Bo 105 could be actually flown with weight shifting, if it was propperly trimmed out.
With SAS you will have the possibility to trim the bird - and if not disturbed, it will fly nicely straight and level - to give you the time to switch radios, punch in the GPS-waypoints and so on.
Evenso over water 3 or 4 AXIS AP is nicer to have, the workload won´t be excessive on a normal day.
Things will be different, if fog comes into the game or i.e. on the North See one of these grey days, where there is no horizon, the water having the same grey the sky has....


Joined: Feb 2006
Posts: 1,067
Likes: 40
From: On the big blue planet
The 135 with SAS is ok, reduces the workload in comparision to the 105 . But for flights over open water I would prefer ATT, 4 axis AP with RadAltHold would be the optimum.
In smooth weatherconditions SAS is sufficient, but workload increases when it gets bumpy...
Most of my time (~2900h ) on 135 was SAS only... My offshore experience was with 3 or 4 axis AP equipped machines of different type
skadi
In smooth weatherconditions SAS is sufficient, but workload increases when it gets bumpy...
Most of my time (~2900h ) on 135 was SAS only... My offshore experience was with 3 or 4 axis AP equipped machines of different type
skadi
Thread Starter

Joined: Dec 2006
Posts: 1,303
Likes: 23
From: UK and MALTA
Hi SKADI thanks for the guidance. I really appreciate your input. I have experience of the B105 SAS mode 20 odd years ago and that would be my frame of reference. The EC135 started out as the BO108 on the drawing board.
So in your experience you think the EC135 SAS is an improvement on the B105 system?
I fully agree that the safest option is with ATT and coupled vertical mode. My problem is I need to justify the extra costs of the ATT.
So in your experience you think the EC135 SAS is an improvement on the B105 system?
I fully agree that the safest option is with ATT and coupled vertical mode. My problem is I need to justify the extra costs of the ATT.

Joined: Feb 2009
Posts: 898
Likes: 0
From: Do I come here often?
DB;
The 135 SAS only is way better than the 105. The 135T2 AP is 3 axis only, but in 2 500 hours on them I still reckon one of the best AP's I've ever worked with.
When you get to the T2+ it gets better still as the climb/decsent rate on selecting an altitude is 500' fpm rather than 1000' fpm. A T2 will get mighty close to VNE quite quickly if you don't reign in the descent rate when selecting an altitude to descend to.
I'm not sure how many T2's were built SAS only, but I doubt its' many as the weight penalty of the full system actually isn't that serious, and certainly it makes the ride far more comfortable for the passengers.
If you want more info pm me.
SND
The 135 SAS only is way better than the 105. The 135T2 AP is 3 axis only, but in 2 500 hours on them I still reckon one of the best AP's I've ever worked with.
When you get to the T2+ it gets better still as the climb/decsent rate on selecting an altitude is 500' fpm rather than 1000' fpm. A T2 will get mighty close to VNE quite quickly if you don't reign in the descent rate when selecting an altitude to descend to.
I'm not sure how many T2's were built SAS only, but I doubt its' many as the weight penalty of the full system actually isn't that serious, and certainly it makes the ride far more comfortable for the passengers.
If you want more info pm me.
SND

Joined: Dec 2004
Posts: 49
Likes: 0
From: Germany
On the EC135 family, there are several layers of SAS help.
The first is Yaw SAS, it just dampers the yaw
The second is Yaw + pitch and roll, P/R, it's better and you may leave the cyclic some seconds to grab something.
The third is Yaw + P/R + Pitch damper which will authorize you to perform IFR dual pilots.
On top of this the APM 2000 which is a 3 axis auto pilot with upper modes, HDG, IAS, maintaining altitude on the pitch mode but with some safety features if the collective is not high enough.
Now, flying above the sea by CAVOK without SAS is OK, it's like a squirrel, by bad weather conditions, you will find the cost of the APM 2000 secondary compared to the huge safety brought.
The T3H, for Helionix, will be delivered next year and is a 4 axis autopilot.
Drakkar
The first is Yaw SAS, it just dampers the yaw
The second is Yaw + pitch and roll, P/R, it's better and you may leave the cyclic some seconds to grab something.
The third is Yaw + P/R + Pitch damper which will authorize you to perform IFR dual pilots.
On top of this the APM 2000 which is a 3 axis auto pilot with upper modes, HDG, IAS, maintaining altitude on the pitch mode but with some safety features if the collective is not high enough.
Now, flying above the sea by CAVOK without SAS is OK, it's like a squirrel, by bad weather conditions, you will find the cost of the APM 2000 secondary compared to the huge safety brought.
The T3H, for Helionix, will be delivered next year and is a 4 axis autopilot.
Drakkar


Joined: Feb 2006
Posts: 1,067
Likes: 40
From: On the big blue planet
On the EC135 family, there are several layers of SAS help.
The first is Yaw SAS, it just dampers the yaw
The second is Yaw + pitch and roll, P/R, it's better and you may leave the cyclic some seconds to grab something.
The third is Yaw + P/R + Pitch damper which will authorize you to perform IFR dual pilots.
On top of this the APM 2000 which is a 3 axis auto pilot with upper modes, HDG, IAS, maintaining altitude on the pitch mode but with some safety features if the collective is not high enough.
Now, flying above the sea by CAVOK without SAS is OK, it's like a squirrel, by bad weather conditions, you will find the cost of the APM 2000 secondary compared to the huge safety brought.
The T3H, for Helionix, will be delivered next year and is a 4 axis autopilot.
Drakkar
The first is Yaw SAS, it just dampers the yaw
The second is Yaw + pitch and roll, P/R, it's better and you may leave the cyclic some seconds to grab something.
The third is Yaw + P/R + Pitch damper which will authorize you to perform IFR dual pilots.
On top of this the APM 2000 which is a 3 axis auto pilot with upper modes, HDG, IAS, maintaining altitude on the pitch mode but with some safety features if the collective is not high enough.
Now, flying above the sea by CAVOK without SAS is OK, it's like a squirrel, by bad weather conditions, you will find the cost of the APM 2000 secondary compared to the huge safety brought.
The T3H, for Helionix, will be delivered next year and is a 4 axis autopilot.
Drakkar
In my opinion, the difference with or without pitch damper is not remarkable in normal flight operation.
skadi
Joined: Nov 2010
Posts: 35
Likes: 0
From: London
If this is regarding a serious proposition to operate flights in the scenario you suggest, I suggest you consider which rules the aircraft will be operated under and what the regulatory requirements might be. But for a daylight and VFR only operation you may be okay form the regulatory point of view.
Whether it's sensible is a different thing all together and depends on many things.
Whether it's sensible is a different thing all together and depends on many things.
Thread Starter

Joined: Dec 2006
Posts: 1,303
Likes: 23
From: UK and MALTA
HELISNIPER - I think I know some of the rules but please elaborate in case I missed something?
Also if you have EC135 SAS mode flight experience I would be grateful if you could share it
Also if you have EC135 SAS mode flight experience I would be grateful if you could share it
Thread Starter

Joined: Dec 2006
Posts: 1,303
Likes: 23
From: UK and MALTA
Hi CRAB,
I was being a little coy. Surely you know enogh about me now to believe I understand the rules well.
Essentially SPIFR requires ATT plus Height and Heading hold.
However SPVFR at night or over the water does not.
There is a strong safety case to say VMC night and overwater flight, both being navigated without reference to visual landmarks, an ATT plus holds is a must. However EU-OPS does not mandate this requirement.
Hence when we consider, in order of importance:
1. SAFETY
2. COMPLIANCE
3. COMMERCIALLY EXPEDIANCE
Flying overwater in a SAS mode machine meets 2 and 3 above. I want to be convinced that it also meets 1 above and with no personal flight experience of the EC135, our ship of choice, hence my rotorheads enquiry on this thread.
Hope this makes more sense now.
I was being a little coy. Surely you know enogh about me now to believe I understand the rules well.
Essentially SPIFR requires ATT plus Height and Heading hold.
However SPVFR at night or over the water does not.
There is a strong safety case to say VMC night and overwater flight, both being navigated without reference to visual landmarks, an ATT plus holds is a must. However EU-OPS does not mandate this requirement.
Hence when we consider, in order of importance:
1. SAFETY
2. COMPLIANCE
3. COMMERCIALLY EXPEDIANCE
Flying overwater in a SAS mode machine meets 2 and 3 above. I want to be convinced that it also meets 1 above and with no personal flight experience of the EC135, our ship of choice, hence my rotorheads enquiry on this thread.
Hope this makes more sense now.



