AS355 for EMS urgently needed
Thread Starter
Join Date: Dec 2009
Location: Europe
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
AS355 for EMS urgently needed
Hi everybody,
we urgently need an AS355 for EMS operations in the Eastern Europe. Any model is welcome: F1, F2, N, NP. Configuration: 1 patient+2 medical attendants.
Thank you.
we urgently need an AS355 for EMS operations in the Eastern Europe. Any model is welcome: F1, F2, N, NP. Configuration: 1 patient+2 medical attendants.
Thank you.
Join Date: Jul 2013
Location: Utrecht, Nederland
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
If you find a helicopter but not the interior you want, then Air Ambulance Technology of Austria do a 355 quick conversion kit:
Slightly off thread but
1 there is no such thing as a quick conversion - at least not in the UK
2 this is IMHO not a good fit. The medical seats offer no support, the right hand attendant cant reach either patient or equipment, and the left hand attendant cant manage the patient's airway from that position.
In the 355 the stretcher can be mounted forward and still hold a 6ft 2 inch patient with the attendant at the patients head, equipment in the middle and on a flying bedstead, and two proper seats.
1 there is no such thing as a quick conversion - at least not in the UK
2 this is IMHO not a good fit. The medical seats offer no support, the right hand attendant cant reach either patient or equipment, and the left hand attendant cant manage the patient's airway from that position.
In the 355 the stretcher can be mounted forward and still hold a 6ft 2 inch patient with the attendant at the patients head, equipment in the middle and on a flying bedstead, and two proper seats.
Join Date: Jul 2013
Location: Katherine
Age: 65
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
AS355F1 available
To Ka26,
we have the helicopter you need in Australia. I can send photos etc, please forward your email address.
Regards,
Clinton
[email protected]
we have the helicopter you need in Australia. I can send photos etc, please forward your email address.
Regards,
Clinton
[email protected]