ec120 hotstart help/advise wanted
Thread Starter
Join Date: May 2009
Location: Holland
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
ec120 hotstart help/advise wanted
We have a dispute with TurboM. about a < 4 sec overtemp on a 3 digit VEMD.
First inspection shows no damage due to overtemp, second report gives damage to first sector of HP ring. ( They are using an other material nowadays). We have the feeling that .....
p.s is a 4digit VEMD mandatory?
First inspection shows no damage due to overtemp, second report gives damage to first sector of HP ring. ( They are using an other material nowadays). We have the feeling that .....
p.s is a 4digit VEMD mandatory?
Join Date: May 2006
Location: stateside
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
We had a hot start on an EC-120 due to low battery voltage and the Turbomeca guys said that due to the ceramic coating on the turbine blades they weren't able to tell if they had been heat stressed so replaced them all. Very expensive decision..
