Helicopter Ground-Runs Performed by Engineers/Mechanics
Thread Starter
Join Date: Jun 2009
Location: South East Asia
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
Helicopter Ground-Runs Performed by Engineers/Mechanics
The recent AS350 accident in Brazil where the helicopter was destroyed on the ground by severe vibrations after landing brings to mind the perennial question of helicopter engine ground-runs being performed by engineers/mechanics. I had expected the thread on this accident to drift into this topic, but it seems to have faded away first.
When the question is asked, the most common and instant reply is "it isn't allowed", but when you ask for the authority of this reply you usually get a deafening slience or "we never do it". The next most common reply is "what if you get into ground resonance, you can't take-off to correct it".
Let's clear up the first reply, "it isn't allowed". Generally, only two parties can say this with total authority; a) the helicopter owner and, b) the helicopter insurerer, both for quite obvious reasons.
I only know of one country where legislation specifcally requires helicopter engine ground-runs to be performed by an approriately rated pilot.
In my previous company, nominated senior engineers/mechanics were trained and authorised to perform engine ground-runs, with limitations of course (no raising the collective etc.) and this was a boon to the end-of-day routine when engine washes and/or minor maintenace was required and there was no lengthy waiting for a pilot. The pilots were happy and the engineers/mechanics were happy.
I wonder, how many other helicopter operators out there allow engineers/mechanics to perform helicopter engine ground-runs. How is this administered and what are the limitations etc.?
When the question is asked, the most common and instant reply is "it isn't allowed", but when you ask for the authority of this reply you usually get a deafening slience or "we never do it". The next most common reply is "what if you get into ground resonance, you can't take-off to correct it".
Let's clear up the first reply, "it isn't allowed". Generally, only two parties can say this with total authority; a) the helicopter owner and, b) the helicopter insurerer, both for quite obvious reasons.
I only know of one country where legislation specifcally requires helicopter engine ground-runs to be performed by an approriately rated pilot.
In my previous company, nominated senior engineers/mechanics were trained and authorised to perform engine ground-runs, with limitations of course (no raising the collective etc.) and this was a boon to the end-of-day routine when engine washes and/or minor maintenace was required and there was no lengthy waiting for a pilot. The pilots were happy and the engineers/mechanics were happy.
I wonder, how many other helicopter operators out there allow engineers/mechanics to perform helicopter engine ground-runs. How is this administered and what are the limitations etc.?
Chief Bottle Washer
Mechanic fatality Orlando is a thread from 2006 where just this problem occurred, with a fatal result.
Join Date: May 2000
Location: Phuket
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
With the possibility of that ground resonance situation or the possibility of a hydraulic problem resulting in the collective going up or a mis-rigged collective bungee/spring, maybe ground runs should be limited to idle unless you have an appropriately rated pilot at the controls.
One amusing one.
I had a shout from ops to go down and rescue some engineers who were sitting in a Puma burning and turning. I rushed out there and there were these two engineers with panic stricken faces sitting in a 330J with one engine at ground idle and the rotors slowly turning. They had got in to do a post chemo vent run and had inadvertantly started the engine and didn't know how to shut it down.
For those not familiar with the Puma there is a start panel underneath the instrument panel which has two engine switches. The first movement runs the starter motor and continuing to the spring loaded start postion starts the automatic starting cycle. To stop everything one has to position the switch back to the off position. They didn't know that; they only knew the run and off positions. They had inadvertantly move the switch to start and they were afraid to touch anything when the engine lit up.
A slight amendment to the brief for vent runs and it didn't happen again.
I had a shout from ops to go down and rescue some engineers who were sitting in a Puma burning and turning. I rushed out there and there were these two engineers with panic stricken faces sitting in a 330J with one engine at ground idle and the rotors slowly turning. They had got in to do a post chemo vent run and had inadvertantly started the engine and didn't know how to shut it down.
For those not familiar with the Puma there is a start panel underneath the instrument panel which has two engine switches. The first movement runs the starter motor and continuing to the spring loaded start postion starts the automatic starting cycle. To stop everything one has to position the switch back to the off position. They didn't know that; they only knew the run and off positions. They had inadvertantly move the switch to start and they were afraid to touch anything when the engine lit up.
A slight amendment to the brief for vent runs and it didn't happen again.
"Just a pilot"
Previous employer allowed trained and approved mechanics to do ground run-ups. My recollection is that the aircraft had to be tied down to the pad. Aircraft were routinely tied down at end of shift, etc. anyhow. Most of the maintenance there was done at night, no pilot available. Worked very well.
Join Date: Aug 2007
Location: mobile
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
For years I carried out ground runs as an engineer on various types including Bells throughout the range and non rotor engaged Alouette runs.
The criterion was that we could carry out runs on skidded aircraft without restriction. I was surprised to see that aircraft enter ground resonance as it is skid equipped however as far as I remember is equiped with dampers on the skid struts which could be the cause.
Ground running of aircraft used to be an engineers normal task, I cannot see the problem except that on entering ground resonance lifting into the hover is the first solution. I personally would be confident to do this but am sure that the way things sre now..........
The criterion was that we could carry out runs on skidded aircraft without restriction. I was surprised to see that aircraft enter ground resonance as it is skid equipped however as far as I remember is equiped with dampers on the skid struts which could be the cause.
Ground running of aircraft used to be an engineers normal task, I cannot see the problem except that on entering ground resonance lifting into the hover is the first solution. I personally would be confident to do this but am sure that the way things sre now..........
Join Date: Jan 2007
Location: here and there
Age: 67
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Last time I was in Norway in 2006 the CHC Norway engineers ( who had the training) ran the S-92 aircraft and probably the Puma to. They did both with rotor brake on and right up to fly position runs rotors turning.
They told me they went to Flight Safety ( S92) for training on running the aircraft and any emergencies they might encounter during a ground run.
I feel with the correct training there is no reason why the engineers can not run the aircraft. Is quite common practice in the fixed wing industry.
I agree makes the pilots and engineers both happy.
They told me they went to Flight Safety ( S92) for training on running the aircraft and any emergencies they might encounter during a ground run.
I feel with the correct training there is no reason why the engineers can not run the aircraft. Is quite common practice in the fixed wing industry.
I agree makes the pilots and engineers both happy.
Join Date: Aug 2007
Location: USA
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
I still have my ground run authorization card (somewhere) allowing ground running of 206's up to the B212.
I do remember an exciting incident offshore when one of our mechanics was running a 206 on the deck, pulled pitch somehow and found himself 15 feet high and spinning. No choice but to point the nose down and get the thing straight.
After a few wobbly trips around the pattern he managed to set the ship down safely, no worse for wear except he was docked to junior mechanic and owned a great bar story.
His explanation was something about a lifevest being under the collective, and he tried to remove it, and oops...up came the collective. A likely story!
Ever since then we had to ground run with the ship tied down, offshore or onshore.
I do remember an exciting incident offshore when one of our mechanics was running a 206 on the deck, pulled pitch somehow and found himself 15 feet high and spinning. No choice but to point the nose down and get the thing straight.
After a few wobbly trips around the pattern he managed to set the ship down safely, no worse for wear except he was docked to junior mechanic and owned a great bar story.
His explanation was something about a lifevest being under the collective, and he tried to remove it, and oops...up came the collective. A likely story!
Ever since then we had to ground run with the ship tied down, offshore or onshore.
Join Date: Dec 2002
Location: Up here, but not for long
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
I do remember an exciting incident offshore when one of our mechanics was running a 206 on the deck, pulled pitch somehow and found himself 15 feet high and spinning. No choice but to point the nose down and get the thing straight.
After a few wobbly trips around the pattern he managed to set the ship down safely, no worse for wear except he was docked to junior mechanic and owned a great bar story
After a few wobbly trips around the pattern he managed to set the ship down safely, no worse for wear except he was docked to junior mechanic and owned a great bar story
Sorry mate you've got the date wrong, today's 1st March not 1st April!
Avoid imitations
Join Date: Nov 2000
Location: Wandering the FIR and cyberspace often at highly unsociable times
Posts: 14,576
Received 429 Likes
on
226 Posts
I feel with the correct training there is no reason why the engineers can not run the aircraft. Is quite common practice in the fixed wing industry.
But if someone else gets trained up to do it so I don't have to go in on a day off or midnight (done both a lot more than once), I'd be more than happy. Provided they didn't knock the hell out of the droop stops or chop the tail off in the process.
Engineers don't like Pilots twisting spanners.....Pilots should not like Engineers moving engine or flight controls.
Plus....it is job security and impacts the pay packet if you let the Engineers do Pilot duties.....just saying.
If the cab goes airborne, decides to enter Ground Resonance, or leaves a parked position firmly on the ground....who would you rather have sat at the helm...Engineer or Pilot?
Plus....it is job security and impacts the pay packet if you let the Engineers do Pilot duties.....just saying.
If the cab goes airborne, decides to enter Ground Resonance, or leaves a parked position firmly on the ground....who would you rather have sat at the helm...Engineer or Pilot?
Avoid imitations
Join Date: Nov 2000
Location: Wandering the FIR and cyberspace often at highly unsociable times
Posts: 14,576
Received 429 Likes
on
226 Posts
Engineer!
Join Date: Oct 2004
Location: Connecticut
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Old Days
In the old days here at Uncle Igor's, the aircraft crew chief used to perform the maintanence ground runs. We complied with the first run in the morning prior to release for test flights and any subsequent ground runs for maintanence performed, vibration adjustments or leak checks. You were required to pass a written exam and 10 starts with PIC to get signed off. I was authorized to turn S76A & B models and the UH-60A Blackhawks. While I sat left seat for many runs in the S61's, S-64's and even a RH-53D I never managed to get those on my run card! Only incident I recall was "Tail Spin Tommy" chasing a fire bottle with a Blackhawk and I had heard of 2 S58's meshing rotors unsuccesfully!! Maybe John Dixson remembers a few more.....
All was ended when the Navy decided it wasnt a good practice to let us boys play with their toys!!
All was ended when the Navy decided it wasnt a good practice to let us boys play with their toys!!
Join Date: Dec 2006
Location: Midlands
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
caa
what comes to mind here is 2 things
1: When something happens what does the insurance say
2: How the Hell have the CAA not put a Stop to this
I think its wrong unless your ppl rated you should not be able to run anything
1: When something happens what does the insurance say
2: How the Hell have the CAA not put a Stop to this
I think its wrong unless your ppl rated you should not be able to run anything
Join Date: Jan 2011
Location: Brighton, UK
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
thats a bit narrow minded.
being an engineer myself and having permission to do rotors running ground run I find it extremely useful. and Im sure the pilots and the company appreciate not having to spend duty time on waiting around for us to do adjustments, leak checks ect. at all hours of the day.
we receive a start up course, get examined by the training captains on a regular basis. get quizzed on emergencies and procedures.
some of my coworkers have more experience in starting a helicopter let alone fly it than some of the company's FO's
so given the right training and procedures. I see absolutely no reason what so ever, that the local CAA's should put a stick in this.
if the insurance company is aware of this I do not foresee any issues.
Att SASless, thinking that engineers doing ground runs will impact the salery is IMO a bit paranoid. as we can still not do test flights. so I wouldnt worry.
being an engineer myself and having permission to do rotors running ground run I find it extremely useful. and Im sure the pilots and the company appreciate not having to spend duty time on waiting around for us to do adjustments, leak checks ect. at all hours of the day.
we receive a start up course, get examined by the training captains on a regular basis. get quizzed on emergencies and procedures.
some of my coworkers have more experience in starting a helicopter let alone fly it than some of the company's FO's
so given the right training and procedures. I see absolutely no reason what so ever, that the local CAA's should put a stick in this.
if the insurance company is aware of this I do not foresee any issues.
Att SASless, thinking that engineers doing ground runs will impact the salery is IMO a bit paranoid. as we can still not do test flights. so I wouldnt worry.