Jet fuel plus FSII/AL48
Avoid imitations
Join Date: Nov 2000
Location: Wandering the FIR and cyberspace often at highly unsociable times
Posts: 14,576
Received 425 Likes
on
224 Posts
You are correct!
Join Date: Jul 2005
Location: UK
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
I wrote to my regular users (A109, AS355, B206, EC120, EC135, EC155, and S76) asking them if they required AL48, not one replied. I assume that they do not need it or are making their own arrangements.
Join Date: Oct 1999
Location: UK
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Shytorque, I think you'll find the 76 does need AL48/ ANother additive below +4 degrees. The C++ flight manual had an error which should have been corrected by now. It's an airframe rather than an engine limitation.
Join Date: Aug 2007
Location: Mrs Miggin's
Age: 47
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know the lastest as to when the fuel suppliers will stop adding FSII? I'd heard that at Newcastle this will be the case soon, if it isn't already and do people plan to fly around with cans of Prist in the cab?
I've never had to use it but have heard that it not the nicest stuff in the world to handle.
Basically just wanted to know what people are planning to do,the ones without fuel heaters that is!
I've never had to use it but have heard that it not the nicest stuff in the world to handle.
Basically just wanted to know what people are planning to do,the ones without fuel heaters that is!
Join Date: Feb 2008
Location: kent
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Jet A1
Were still selling jet A1 with al48 supplied by air total but have been told that after xmas they will not be supplying it with AL48,quoted £6.000 +vat to have an injector fitted ,think ill just change the filters more often.
Join Date: Apr 2007
Location: Center of the Universe
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
FSII & certification
Not sure of this, but I believe that some helicopters are certified on the basis that fuel shall contain FSII. My Enstrom 480B is one of these. I have been told by the manufacturer that FSII is not required for technical reasons, but because the certification was done with FSII, it is now called out in the FM as "required." Given this, it would seem that without FSII the acft is not considered airworthy under FAA regs; if so this would have implications for insurance coverage if operated without , as well as other unhappy implications. Any brilliant insights?
Join Date: Apr 2007
Location: Center of the Universe
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
do people plan to fly around with cans of Prist in the cab?
Join Date: Dec 2000
Location: Ask the voices!
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
Just to add my two-penneth!
PRIST is HORRIBLE stuff!!!! I wouldn't touch it personally. Although most of the anti-ice additives are pretty dangerous, PRIST seems to be the worst.
If I remember correctly it can affect fertility (both male and female), damage unborn fetuses and that is just the bits I remember, we had a few people refuse to use it just down to what they read on the Safety Data Sheet!!!
PRIST is HORRIBLE stuff!!!! I wouldn't touch it personally. Although most of the anti-ice additives are pretty dangerous, PRIST seems to be the worst.
If I remember correctly it can affect fertility (both male and female), damage unborn fetuses and that is just the bits I remember, we had a few people refuse to use it just down to what they read on the Safety Data Sheet!!!
Join Date: Aug 2007
Location: Mrs Miggin's
Age: 47
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
EN48
I must admit I'm not keen to carry cans of Prist around but I have been assured that the aerosol cans are are safe enough in the aircraft (unpressurised) so long as they haven't been discharged. i.e don't use half a can and then throw it back in the boot.
I'm not keen to use the stuff at all and it seems neither is anyone else, I have heard that in the states and Canada firms use it all the time, is there anyone out there who does use it on a day to day basis who could offer some feedback?
Incidentally our FM(Bo105) states an anti-ice additive should be used to assure consistent starts at temperatures below +4c especially if the engine has been allowed to cold soak, it goes on however, to say that once started Jet A1 will run the engine satisfactorily down to -32c...........so providing it's been in a warm hangar say before you start it does that mean you don't need the anti-ice additive?
I must admit I'm not keen to carry cans of Prist around but I have been assured that the aerosol cans are are safe enough in the aircraft (unpressurised) so long as they haven't been discharged. i.e don't use half a can and then throw it back in the boot.
I'm not keen to use the stuff at all and it seems neither is anyone else, I have heard that in the states and Canada firms use it all the time, is there anyone out there who does use it on a day to day basis who could offer some feedback?
Incidentally our FM(Bo105) states an anti-ice additive should be used to assure consistent starts at temperatures below +4c especially if the engine has been allowed to cold soak, it goes on however, to say that once started Jet A1 will run the engine satisfactorily down to -32c...........so providing it's been in a warm hangar say before you start it does that mean you don't need the anti-ice additive?
Join Date: Apr 2007
Location: Center of the Universe
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
I have heard that in the states and Canada firms use it all the time
Join Date: Nov 2007
Location: Where it rains a lot .....
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
how did this get on the front page -
no one has posted on it since 2008 ?????
interesting that a few winters have passed and there doesnt seem to be an answer still ??
i dont want to die by prist - but nor do i want my engine / fuel to freeze and konk out .......
what about a gas mask - when spraying the can of prist in ???
nelly
no one has posted on it since 2008 ?????
interesting that a few winters have passed and there doesnt seem to be an answer still ??
i dont want to die by prist - but nor do i want my engine / fuel to freeze and konk out .......
what about a gas mask - when spraying the can of prist in ???
nelly
Sounds like a night out in (insert name of major UK conurbation here...)