Go Back  PPRuNe Forums > Aircrew Forums > Rotorheads
Reload this Page >

RFI - Underslung Loads - Slings - Hooking Up

Wikiposts
Search
Rotorheads A haven for helicopter professionals to discuss the things that affect them

RFI - Underslung Loads - Slings - Hooking Up

Thread Tools
 
Search this Thread
 
Old 15th Aug 2007, 22:04
  #1 (permalink)  
Thread Starter
 
Join Date: Jan 2007
Location: EGNL, Barrow-in-Furness, Cumbria, UK
Age: 65
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Question RFI - Underslung Loads - Slings - Hooking Up

RFI - Underslung Loads - Slings - Hooking Up

Hi Folks

My apologies for the intrusion with a totally numpty type question, (non-flyer).

Could anyone please outline
when / if ever, the following would be permissible ?

IRL, when picking up a load using a fixed sling -

Is it ever permissible to 'fish' for the load ?
or is it always the case
that someone on the ground/vessel would perform the hookup ?

Info required for a game simulation environment.

TIA
ATB
Paul
BASys is offline  
Old 16th Aug 2007, 00:19
  #2 (permalink)  
 
Join Date: Oct 2006
Location: UK
Posts: 5,222
Likes: 0
Received 4 Likes on 3 Posts
A load is always hooked up by somebody down below. 1: to ensure that the strops, nets etc are arranged so that they grip the load evenly and 2: To ensure the hook is engaged positively.
Fareastdriver is offline  
Old 16th Aug 2007, 00:46
  #3 (permalink)  
 
Join Date: Aug 2007
Location: Afghanistan
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
I have done self hook-ups in the UH60. We land next the load (storage container, fuel blivet, cargo pallet, etc...) then we have one of the crewmen from the back tie a couple of blade ropes to the the end of the sling clevis. The crewman in the back is sitting near the cargo hook access cover, reaches through and grabs the blade rope. As we begin lifting the helo and centering over the load, the crewman pulls the ropes into the cabin through the hole in the floor. Ultimately the helo will be over the load and we will attach the hook. Could be a bit dangerous for the crewman if we had an emergency before he could untie the ropes, but never had an issue. It works, when no one is around to hook the load. M.A.C.
UH60Hwkdrvr is offline  
Old 16th Aug 2007, 00:51
  #4 (permalink)  
 
Join Date: Aug 2007
Location: Monde
Posts: 368
Likes: 0
Received 0 Likes on 0 Posts
If you land next to the load, why not just use a longer strop and hook it straight to the aircraft, then lift up and right?
Vie sans frontieres is offline  
Old 16th Aug 2007, 01:15
  #5 (permalink)  
 
Join Date: Oct 2006
Location: UK
Posts: 5,222
Likes: 0
Received 4 Likes on 3 Posts
Exactly. Why risk a crewmans hands or anything else if it can be avoided. Anyway it is not fishing in the way that the original poster was thinking of. I can understand the logic of avoiding having a long strop because I have found that the shorter the strop is, but long enough to allow for the load to up-end itself in flight, the better it flies. The old British Army 105mm howitzer with the spades deployed would cruise quite happily at 140 knots on a 6ft strop. Even faster if the hook became undone.
Fareastdriver is offline  
Old 16th Aug 2007, 01:17
  #6 (permalink)  
 
Join Date: Nov 2004
Location: canada
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
Perhaps a bit in the special application department, some seismic operators employ a "bag runner" which requires no ground personnel to attach to load to the long/short line of the helicopter.

Personnel do have to lay the load out properly before hand, but do not need to be present during the actual hook-up. This allows the helicopter to quickly move from location to location, making multiple pickups without waiting for groundcrew.

http://www.veritasdgc.com/bins/conte...p?cid=4-99-645
rotorfloat is offline  
Old 16th Aug 2007, 06:58
  #7 (permalink)  
 
Join Date: Mar 2003
Location: JAA land
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Selfhooking is a common procedure while Ag ops. May be i can find some pics in my archive. Itīs tricky, yes, but very very fast in the hand of experts.
greenthumb is offline  
Old 19th Aug 2007, 17:00
  #8 (permalink)  
Thread Starter
 
Join Date: Jan 2007
Location: EGNL, Barrow-in-Furness, Cumbria, UK
Age: 65
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up

Hi Folks

Many thanks for your replies.

Your information confirmed my understanding,
further backed up by active crew of the particular a/c type concerned.

I'll pass this on to the developer.



Just to reiterate,
the in-game implementation is currently -
fishing with a dangling 75' sling,
which automatically hooks a load
if the player correctly positioned the a/c
whilst flying <= 8kts.

Loads hooked could be upto 10,000 lbs

Seems a quick way to burn 6 million quid.



rotorfloat -
Thanks for the "Bag-Runner" & "DynaNav GPS" link,
that mechanism does look like a suitable representation
of whats been currently implemented.



Many thanks
ATB
Paul
BASys is offline  
Old 19th Aug 2007, 17:35
  #9 (permalink)  
 
Join Date: Jul 2004
Location: Huntsville AL
Age: 51
Posts: 139
Likes: 0
Received 0 Likes on 0 Posts
The closest thing I can think of to "fishing" would be grapple logging. The pilot sets the grapple (a big hydraulicly driven claw) on top of the log he wants and hits a switch to close it then up and way they go. Was quite the job when you had to pick up one log. move it over relese and then pick up two or more logs to build an adequate turn.

Max
maxtork is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.