Go Back  PPRuNe Forums > Aircrew Forums > Rotorheads
Reload this Page >

Tips for Airport Fire Department?

Wikiposts
Search
Rotorheads A haven for helicopter professionals to discuss the things that affect them

Tips for Airport Fire Department?

Thread Tools
 
Search this Thread
 
Old 30th Jul 2007, 17:26
  #1 (permalink)  
Thread Starter
 
Join Date: Jan 2006
Location: Canada
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Question Tips for Airport Fire Department?

Hi all,

I fly a police R44 from an international airport that has only few helicopter movements.
Yesterday an airport fireman asked me what the specifics are for extinguishing a helicopter on fire. Happily surprised by the guys initiative I told him I would get back to him after thinking of some useful stuff to say.

Is there anybody that can give me some advise on the matter? Or is it as simple as just telling them;
  • to watch out for the tail and main rotor
  • how to open the cowlings
  • how to stop the engine and use the rotor brake
  • and how to operate the doors and seatbelts?
Thanks for the feedback,
GB
gone birdy is offline  
Old 30th Jul 2007, 20:11
  #2 (permalink)  
 
Join Date: Sep 2003
Location: Redding CA, or on a fire somewhere
Posts: 1,960
Received 50 Likes on 15 Posts
Turn off fuel valve BEFORE the battery.
Gordy is offline  
Old 30th Jul 2007, 20:12
  #3 (permalink)  
 
Join Date: Sep 2006
Location: By the A&P
Posts: 147
Likes: 0
Received 0 Likes on 0 Posts
Show him where the engines are on different types (i.e. .R22/R44/300C(Bi), 206, MD500, etc.). Show where the intakes are on turbines in order to be able to spray foam into them. I dunno. I imagine there is a company that could be contracted to do a training...

Perhaps a friendly reminder to airfield management that an airfield that has a fire department and allows heli ops will be liable if said FD doesn't know how to deal with heli-related emergencies.
MSP Aviation is offline  
Old 30th Jul 2007, 20:55
  #4 (permalink)  
 
Join Date: Jun 2005
Location: Earth.
Posts: 465
Received 0 Likes on 0 Posts
Rotorbrake, doors, seatbelts, engine intakes, awareness and dangers of running helicopters/rotors, position of fuel shut-off valves and battery switches.

Ask them to spray gas extinguishers into engines instead of foam. I have seen someone go nuts with a foam unit before... was only a smokey engine that would have required some minor maintenance, but ended up being thrown in the trash due to the foam. If the aircraft is up in flames, go nuts with the foam!
TiPwEiGhT is offline  
Old 31st Jul 2007, 13:39
  #5 (permalink)  
FFF
 
Join Date: Jul 2007
Location: Florida
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
A point to remember for the rescue part - after any fire is extinguished - is that a helicopter will tend to come to rest on its side if it was an uncontrolled landing (due to the high center of gravity). This makes extracting the occupants more difficult.

If the guys really want to be proactive, then training on a mock-up on its side could help them work out the best ways to tackle this.

FFF
FFF is offline  
Old 31st Jul 2007, 17:04
  #6 (permalink)  
 
Join Date: Dec 2005
Location: England
Posts: 1,459
Received 34 Likes on 20 Posts
Not sure why anyone wants to spray fire extinguishant into an engine intake.

Most engine fires are the result of oil or fuel leaks on the external systems of the engine.
Spraying chemicals in the intake results in loads of smoke out of the exhaust with the fire keeping it all warm!!!!!!!

Few modern helicopters seem to have proper fire access doors to the engine compartment.
The only decent access seems to be around the exhaust pipes (not up them). Most airport fire trucks would not have a nozzle that would fit in this space.
ericferret is offline  
Old 31st Jul 2007, 17:28
  #7 (permalink)  
 
Join Date: Dec 2004
Location: USA
Age: 55
Posts: 305
Likes: 0
Received 0 Likes on 0 Posts
ericferret,

Spraying foam into the intakes is not done in an attempt to put out an engine fire; rather, it is done to try and block the air supply to a running turbine in order to stop it when it is unsafe to approach the aircraft and reach the fuel cutoff switch.
Revolutionary is offline  
Old 31st Jul 2007, 20:32
  #8 (permalink)  
 
Join Date: Sep 2006
Location: By the A&P
Posts: 147
Likes: 0
Received 0 Likes on 0 Posts
What he said ^^^.

If a helicopter rolls on its side it may shear rotors but the engine remains running and the stub of a rotor hub remains rotating. Spraying foam into the intakes is the only safe way to get at the occupants.
MSP Aviation is offline  
Old 31st Jul 2007, 22:36
  #9 (permalink)  
 
Join Date: Dec 2005
Location: England
Posts: 1,459
Received 34 Likes on 20 Posts
The original post seems to be about an engine fire not a crash and goes on to discuss general access. Hence my comments. Nobody wants a ruined engine for a minor oil leak.

In the event of a crash and fire they are going to smother the whole thing.
ericferret is offline  
Old 31st Jul 2007, 23:43
  #10 (permalink)  
800
 
Join Date: Jul 2005
Location: Aus
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
If it is a proper "contact with the ground without the pilots authority" the only real consideration is the extraction of the occupants.

the insurance company can take care of the rest!
800 is offline  
Old 1st Aug 2007, 04:52
  #11 (permalink)  
 
Join Date: Dec 2006
Location: Near the beach
Age: 63
Posts: 61
Likes: 0
Received 0 Likes on 0 Posts
G'day Gone Birdy,

A couple of courses that may benifit are: Helicopter Landing Officer and Helideck Fire Fighter. Although these are specifically aimed at the oil and gas industry they would prepare fire fighters for all on-ground helicopter emergencies encountered at an airport.

Sorry I don't have details of training centers in the States, but Mr. Google should be able to help.
Treg is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.