Go Back  PPRuNe Forums > Aircrew Forums > Rotorheads
Reload this Page >

Poor man's cockpit voice & radio comms recorder

Wikiposts
Search
Rotorheads A haven for helicopter professionals to discuss the things that affect them

Poor man's cockpit voice & radio comms recorder

Thread Tools
 
Search this Thread
 
Old 19th Feb 2007, 05:04
  #1 (permalink)  
Thread Starter
 
Join Date: Feb 2007
Location: Australia
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Poor man's cockpit voice & radio comms recorder

Disclaimer: I am not an electronics person.

Has anyone rigged up a recording device that effectively picks up anything that goes to the headset earphones (ie. ICS as well as radio transmissions as well as all background radio chatter)?

I'm thinking specifically of using this with a NATO plug, so instructions for doing it with a fixed-wing-type split lead thingy wouldn't help me (ref disclaimer above).

I'm asking for tips, or "good God don't even think about it" comments, because I've heard you can cause problems by using the wrong input signal to a "standard" microphone input on, say, an MP3 recording device, or dictaphone type thing, and subsequently fry the bugger.

Is this making sense to anyone?
noexcessivecranking is offline  
Old 19th Feb 2007, 06:18
  #2 (permalink)  
 
Join Date: Aug 2002
Location: UK
Age: 73
Posts: 338
Received 2 Likes on 1 Post
For test flying purposes I use an external mic on my Panasonic dictaphone. If you get the sort of mic which attaches to a telephone (sticks on with a suction cup) this is just the job. It can be placed inside the ear-cup of a headset or flying helmet and is quite comfortable to use. However, it will pick up some extraneous noise. But it will always work, whatever the system impedence of the aircraft being flown.
idle stop is offline  
Old 19th Feb 2007, 07:51
  #3 (permalink)  
 
Join Date: Feb 2006
Location: Germany
Posts: 919
Received 5 Likes on 3 Posts
Hi noexcessivecranking,

Handy with kabel free-speaking-unit works.
The microphones are so smal by now and the cabel so thin, that it is quite easy, to place the mic into the headset.
With a litte fudling, you get the earphones and the mic so inside, that you don't have interferences, then you can actually make/receive phonecalls (depending on the altitude you're flying ;-))

Greetings
"Flying Bull"
Flying Bull is offline  
Old 19th Feb 2007, 08:05
  #4 (permalink)  
Thread Starter
 
Join Date: Feb 2007
Location: Australia
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
In your experience, is the amount of engine noise bearable? Could you use the recording as a training aid?
noexcessivecranking is offline  
Old 19th Feb 2007, 08:26
  #5 (permalink)  
 
Join Date: Sep 2002
Location: Great South East, tired and retired
Posts: 4,395
Received 228 Likes on 104 Posts
I used a little Panasonic cassette recorder which has a vox setting, plus a little mic on a long cord.

Put the mic inside the earcup, put the recorder on your belt, and adjust the vox sensitivity until it only breaks when you press the intercom button or the radio receives something. The recorder stops after 10 secs of silence.

The end result is a faithful record of all intercom and radio comms, without the huge gaps of silence that come in real time. great for giving the cassette to the student after his flight, to listen in the car on the way home. Amazing how many times they hear me telling them to do something before they actually do it.
Ascend Charlie is offline  
Old 19th Feb 2007, 16:42
  #6 (permalink)  
 
Join Date: Feb 2006
Location: Germany
Posts: 919
Received 5 Likes on 3 Posts
Hi noexcessivecranking,

have a tight sitting headset.
Going to fly this or one of the next nights - if weather permits and we're needed ;-) (otherwise playing cards ;-))
I'm doing a recording with my SE-Handy and send you a personal mail, where you can find it to download.

Greetings "Flying Bull"
Flying Bull is offline  
Old 20th Feb 2007, 08:05
  #7 (permalink)  
 
Join Date: Jul 2002
Location: Somewhere, Over the Rainbow
Posts: 200
Likes: 0
Received 0 Likes on 0 Posts
I did the in-the-earcup thing for a while, however found that whatever I said would be picked up much louder due to my jaw making so damn much noise (similar to those fancy bone microphones firefighters use). Now I use an extra Davie Clark with a Lav (lapel) mic put inside, the cups taped together. Mic goes to a cheap-o voice recorder's mic plug. Picks up just enough ambient engine noise so you can hear power changes, ETL vibrato, etc and everyone's speech volume is equal. We have plenty of ICS plugs on our helicopter, though a splitter could be fashioned by a smart electrician if you're running low on plug ins.

I've also used the in-the-extra-headset bit with a wireless transmitter for video outside the helicopter, such as video for classes on hoisting. Makes it a lot easier than recording it on a voice recorder, then using some form of post processing to mix it.

-Mike
TwinHueyMan is offline  
Old 20th Feb 2007, 09:36
  #8 (permalink)  
Thread Starter
 
Join Date: Feb 2007
Location: Australia
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Thanks Mike, great value - that sounds like a winner.
noexcessivecranking is offline  
Old 20th Feb 2007, 20:08
  #9 (permalink)  
 
Join Date: Jul 2005
Location: ?????
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Buy a digital recorder (about $50) and wire a jack from your headset earpiece. I used a 3.5mm female jack and simply plug a 3.5mm audio lead from the headset to the recorder. Records perfectly all intercom/radio. You can also play MP3 etc back through it for music. Works a treat.
whosthatS76pilot is offline  
Old 21st Feb 2007, 07:47
  #10 (permalink)  
Thread Starter
 
Join Date: Feb 2007
Location: Australia
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Sorry, I don't understand. Do you mean it's possible to connect the microphone input wires to the headset earpiece wires? I would have thought this to be the perfect recipe for frying your digital recorder. And where can you get a digital recorder for $50? The cheapest I've found is about $90 for anything more than about 30 minutes of recording time.
noexcessivecranking is offline  
Old 23rd Feb 2007, 01:36
  #11 (permalink)  
 
Join Date: Jul 2005
Location: ?????
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Well it doesn't fry mine! I bought the digital recorder in the US for about US$40 and can record about 3.5 hours. You can connect it to any recorder though, most accept a 3.5 mm standard jack.
whosthatS76pilot is offline  
Old 23rd Feb 2007, 09:36
  #12 (permalink)  
 
Join Date: Feb 2006
Location: Germany
Posts: 919
Received 5 Likes on 3 Posts
Hi all,

for recording - some searching at ebay for mp3 player and recording (I did it with the german words ;-) ) and you get for 45€ including sending (in Germany) a device, capable of recording up to 280 hrs.

http://cgi.ebay.de/1-8-LCD-2-GB-2GB-...QQcmdZViewItem

Some other excamples with less recording time
http://cgi.ebay.de/USB-MP3-Player-St...QQcmdZViewItem
36 € with 1GB Memory

or 26 € with 512 MB memory.
http://cgi.ebay.de/ws/eBayISAPI.dll?..._promot_widget

Just put the mp3 player in record-modus and put it in some soft foam plastik in an extra headset, hold together with tape or rubber band and you can record the whole flight.

It also works with the microphone of a cabel headset from a mobile phone (as noexcessivecranking should know by now), but there you get (depending of the phone) only amr-records, which you have to convert to mp3, to use them with the computer (or get a programm, playing amr)

Greetings Flying Bull

Last edited by Flying Bull; 23rd Feb 2007 at 09:39. Reason: forgot one link
Flying Bull is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.